Toyota Tundra. Manual — part 1914
Fig. 447: Identifying Front Engine Mounting Insulator Nut (LH)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
INSTALL FRONT ENGINE MOUNTING INSULATOR RH
a
Install the mounting insulator with the nut
Torque: 72 N*m (734 kgf*cm, 53 ft.*lbf)
Fig. 448: Identifying Front Engine Mounting Insulator Nut (RH)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3
INSTALL ENGINE ASSEMBLY
a
Install the engine assembly to the vehicle (see INSTALLATION )
REAR ENGINE MOUNTING
COMPONENTS
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Fig. 449: Identifying Rear Engine Mounting Replacement Components For 2WD (With Torque
Specifications)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Fig. 450: Identifying Rear Engine Mounting Replacement Components For 4WD (With Torque
Specifications)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1
SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY
a
Support the transmission with a transmission jack Lift the transmission slightly from the
crossmember
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Fig. 451: Identifying Automatic Transmission Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY
a
for 2WD:
1
Remove the 4 rear engine mounting insulator bolts
Fig. 452: Locating Rear Engine Mounting Insulator Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
Remove the 4 nuts, 4 washers, 4 bolts and crossmember
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (2UZ-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст