Toyota Tundra. Manual — part 1812
HINT:
Thoroughly clean all parts to be assembled
Before installing the parts, apply new engine oil to all sliding and rotating surfaces
Replace all gaskets, O-rings and oil seals with new ones
1
REMOVE OIL PRESSURE SWITCH
a
Using a 24 mm deep socket wrench, remove the oil pressure switch
Fig. 234: Using Deep Socket Wrench To Remove Oil Pressure Switch
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
REMOVE ENGINE COOLANT TEMPERATURE SENSOR
a
Remove the engine coolant temperature sensor and gasket
Fig. 235: Locating Engine Coolant Temperature Sensor & Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3
REMOVE CYLINDER BLOCK WATER DRAIN COCK SUB-ASSEMBLY
a
Remove the 2 water drain cocks
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (1GR-FE) - Tundra
Fig. 236: Identifying Water Drain Cocks
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4
REMOVE VVT SENSOR
a
Remove the 2 bolts and 2 VVT sensors from the cylinder head LH and RH
Fig. 237: Locating VVT Sensors & Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5
REMOVE CRANKSHAFT POSITION SENSOR
a
Remove the bolt and crankshaft position sensor
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (1GR-FE) - Tundra
Fig. 238: Locating Crankshaft Position Sensor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6
REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
a
Remove the 2 bolts and 2 camshaft timing oil control valves from the cylinder head LH and RH
b
Remove the 2 O-rings
Fig. 239: Locating Camshaft Timing Oil Control Valves Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
7
REMOVE OIL CONTROL VALVE FILTER
a
Remove the 2 unions, 2 filters and 2 gaskets from cylinder head LH and RH
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (1GR-FE) - Tundra
Fig. 240: Identifying Oil Control Valve Filter
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8
REMOVE OIL FILTER SUB-ASSEMBLY (See REPLACEMENT )
9
DISCONNECT NO. 2 OIL COOLER HOSE
10
DISCONNECT OIL COOLER HOSE
Fig. 241: Locating No. 2 Oil Cooler Hose And Oil Cooler Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
11
REMOVE OIL COOLER ASSEMBLY
a
Remove the oil cooler union bolt, plate washer and oil cooler
Fig. 242: Identifying Union Bolt, Plate Washer And Oil Cooler
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (1GR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст