Toyota Tundra. Manual — part 1656
Fig. 384: Locating VVT Sensor Connectors With Mounting Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALLATION
1. INSTALL VVT SENSOR
a. Install the 4 sensors with the 4 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 385: Locating VVT Sensor Connectors With Mounting Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Connect the 4 sensor connectors.
2. INSTALL AIR CLEANER HOSE ASSEMBLY (See INSTALLATION )
3. INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
CRANKSHAFT POSITION SENSOR
COMPONENTS
2009 Toyota Tundra
2009 ENGINE PERFORMANCE Engine Control System (3UR-FBE) - Tundra
Saturday, June 19, 2010 7:34:51 PM
Page 717
© 2006 Mitchell Repair Information Company, LLC.
Fig. 386: Identifying Crankshaft Position Sensor And Related Components With Torque Specifications
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR
a. Remove the 2 bolts and sensor protector.
Fig. 387: Locating Crankshaft Position Sensor Protector With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. REMOVE CRANKSHAFT POSITION SENSOR
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
Fig. 388: Locating Crankshaft Position Sensor Connector With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE PERFORMANCE Engine Control System (3UR-FBE) - Tundra
Saturday, June 19, 2010 7:34:51 PM
Page 718
© 2006 Mitchell Repair Information Company, LLC.
INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
a. Install the sensor with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 389: Locating Crankshaft Position Sensor Connector With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Connect the sensor connector.
2. INSTALL CRANKSHAFT POSITION SENSOR PROTECTOR
a. Install the sensor protector with the 2 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig. 390: Locating Crankshaft Position Sensor Protector With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
ENGINE COOLANT TEMPERATURE SENSOR
COMPONENTS
2009 Toyota Tundra
2009 ENGINE PERFORMANCE Engine Control System (3UR-FBE) - Tundra
Saturday, June 19, 2010 7:34:51 PM
Page 719
© 2006 Mitchell Repair Information Company, LLC.
Fig. 391: Exploded View Of Engine Coolant Temperature Sensor With Torque Specifications
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE NO. 1 ENGINE UNDER COVER (See REPLACEMENT )
2. REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
3. DRAIN ENGINE COOLANT (See COOLANT )
4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
a. Disconnect the sensor connector.
Fig. 392: Locating Engine Coolant Temperature Sensor Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Using a 19 mm ball joint lock nut wrench, remove the sensor.
c. Remove the gasket from the sensor.
INSPECTION
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
2009 Toyota Tundra
2009 ENGINE PERFORMANCE Engine Control System (3UR-FBE) - Tundra
Saturday, June 19, 2010 7:34:51 PM
Page 720
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст