Toyota Tundra. Manual — part 2374
Tilt) (See REASSEMBLY )
3
INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual
Tilt and Manual Telescopic Steering Column) (See REASSEMBLY )
4
INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Power
Tilt and Power Telescopic Steering Column) (See REASSEMBLY )
5
INSTALL STEERING COLUMN ASSEMBLY
a
for Manual Tilt:
Install the steering column assembly (See INSTALLATION )
b
for Manual Tilt and Telescopic:
Install the steering column assembly (See INSTALLATION )
c
for Power Tilt and Power Telescopic:
Install the steering column assembly (See INSTALLATION )
6
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after
the cable is reconnected (See INITIALIZATION ).
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
2009 ENGINE
Starting (3UR-FE) - Tundra
STARTING SYSTEM
PARTS LOCATION
Fig. 1: Identifying Location Of Starting System Components (1 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 2: Identifying Location Of Starting System Components (2 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
SYSTEM DIAGRAM
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FE) - Tundra
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FE) - Tundra
Fig. 3: Starting System Diagram
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
STARTER
COMPONENTS
Fig. 4: Identifying Starter Components With Torque Specifications (1 Of 5)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 5: Identifying Starter Components With Torque Specifications (2 Of 5)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FE) - Tundra
Fig. 6: Identifying Starter Components With Torque Specifications (3 Of 5)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 7: Identifying Starter Components With Torque Specifications (4 Of 5)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Fig. 8: Identifying Starter Components With Torque Specifications (5 Of 5)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
Some systems need to be initialized after the cable is reconnected
(see INITIALIZATION ).
After the ignition switch is turned OFF, the navigation system
requires approximately 90 seconds to record various types of
memory and settings. As a result, after turning the ignition switch
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст