Toyota Tundra. Manual — part 424
Techstream
Combination Meter:
TECHSTREAM COMBINATION METER SPECIFICATIONS
OK: Vehicle speed displayed on tester is almost the same as actual vehicle speed
measured using speedometer tester (calibrated chassis dynamometer).
NG: Go to step 5
OK: REPLACE COMBINATION METER ASSEMBLY (see REMOVAL )
5. READ VALUE OF TECHSTREAM (WHEEL SPEED SENSOR)
a. Operate the Techstream according to the display and select "DATA LIST" or "Data List" (see
DATA LIST / ACTIVE TEST ).
Techstream
ABS/VSC/TRAC:
TECHSTREAM ABS/VSC/TRAC REFERENCE
OK: Vehicle speed displayed on tester is almost the same as actual vehicle speed
measured using speedometer tester (calibrated chassis dynamometer).
NG: REPLACE ABS AND TRACTION ACTUATOR ASSEMBLY (See DISASSEMBLY )
OK: REPLACE COMBINATION METER ASSEMBLY (see REMOVAL )
TACHOMETER MALFUNCTION
DESCRIPTION
The combination meter receives engine revolution signals from the ECM via the CAN line. The combination
meter displays engine revolution data that is calculated based on the data received from the ECM.
WIRING DIAGRAM
Tester
Display
Measurement Item/Range
Normal Condition
Diagnostic
Note
Vehicle Speed
meter
Vehicle speed/Min.: 0 (0),
Max.: 255(158)
Almost same as actual speed
(when driving)
Unit: km/h
(mph)
Tester Display
Measurement Item/Range
Normal
Condition
Diagnostic Note
(FL/FR/RURR)
Wheel Speed
Wheel speed sensor (FL/FR/RL/
RR) reading/Min.: 0 (0), Max.:
326(202)
Actual wheel
speed
Similar speed as
indicated on
speedometer
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
Fig. 34: Tachometer Malfunction - Wiring Diagram
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION PROCEDURE
1. CHECK CAN COMMUNICATION SYSTEM
a. Check for DTCs (see DTC CHECK/CLEAR ).
Result
DTC RESULT REFERENCE
B: Go to CAN COMMUNICATION SYSTEM (See CAN COMMUNICATION SYSTEM )
A: Go to next step
2. PERFORM ACTIVE TEST BY TECHSTREAM (TACHOMETER)
a. Operate the Techstream according to the display and select "ACTIVE TEST" or "Active Test" (see
DATA LIST / ACTIVE TEST ).
Techstream
Combination Meter:
TECHSTREAM COMBINATION METER SPECIFICATIONS
Result
Proceed to
CAN communication system DTC is not output
A
CAN communication system DTC is output
B
Diagnostic
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
HINT:
Confirm that the vehicle is stopped and engine idling.
OK: Needle indication is normal.
NG: REPLACE COMBINATION METER ASSEMBLY (see REMOVAL )
OK: Go to next step
3. READ VALUE OF TECHSTREAM (TACHOMETER)
a. Operate the Techstream according to the display and select "ACTIVE TEST" or "Active Test" (see
DATA LIST / ACTIVE TEST ).
Techstream
Combination Meter:
TECHSTREAM COMBINATION METER SPECIFICATIONS
OK: Engine speed displayed on tester is almost the same as actual engine speed.
NG: Go to step 4
OK: REPLACE COMBINATION METER ASSEMBLY (see REMOVAL )
4. READ VALUE OF TECHSTREAM (ENGINE SPEED)
a. Operate the Techstream according to the display and select "DATA LIST" or "Data List" (see
DATA LIST / ACTIVE TEST ).
Techstream
Engine and ECT:
TECHSTREAM ENGINE AND ECT SPECIFICATIONS
Result
RESULT REFERENCE
Tester Display
Test Part
Control Range
Note
Tachometer
Operation
Tachometer
0,1000, 2000, 3000, 4000, 5000, 6000,
7000
-
Tester Display
Measurement Item/Range
Normal Condition Diagnostic Note
Engine Rpm Engine speed/Min.: 0, Max.: 12750 Idling: 700 to 800 Unit: rpm
Tester Display
Measurement Item/Range
Normal Condition Diagnostic Note
Engine Speed Engine speed/Min.: 0, Max.: 16838.75 Idling: 700 to 800 Unit: rpm
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
OK: Engine speed displayed on tester is almost the same as actual engine speed.
B: Go to PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
C: Go to PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
D: Go to PROBLEM SYMPTOMS TABLE
E: Go to PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE
A: REPLACE COMBINATION METER ASSEMBLY (see REMOVAL )
FUEL RECEIVER GAUGE MALFUNCTION
DESCRIPTION
The fuel sender gauge has a variable resistance mechanism. The resistance decreases when the fuel amount
increases, and the resistance increases when the fuel amount decreases. The fuel receiver gauge changes based
on the resistance of the fuel sender gauge.
WIRING DIAGRAM
Result
Proceed to
Engine speed displayed on tester is almost
same as actual engine speed
A
Engine speed displayed on tester is not same
as actual engine speed (for 1GR-FE)
B
Engine speed displayed on tester is not same
as actual engine speed (for 2UZ-FE)
C
Engine speed displayed on tester is not same
as actual engine speed (for 3UR-FE)
D
Engine speed displayed on tester is not same
as actual engine speed (for 3UR-FBE)
E
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Meter - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст