Toyota Tundra. Manual — part 1712
Fig. 49: Identifying Air Injection System Hose Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Connect the wire harness bracket with the bolt and attach the wire harness clamp
Fig. 50: Identifying Wire Harness Bracket Bolt And Wire Harness Clamp
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Connect the 2 air pump connectors
2009 Toyota Tundra
2009 ENG NE Emission Control (1GR-FE) - Tundra
Fig. 51: Identifying Air Pump Connectors
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
7
CONNECT NO. 2 AIR INJECTION SYSTEM HOSE
a
Connect the No 2 air injection system hose to the air tube
8
CONNECT NO. 3 AIR INJECTION SYSTEM HOSE
a
Connect the No 3 air injection system hose to the air tube
9
INSTALL INTAKE AIR SURGE TANK (See INSTALLATION )
10
INSTALL AIR CLEANER ASSEMBLY WITH ELEMENT (See INSTALLATION )
11
INSTALL NO. 2 AIR CLEANER HOSE (See INSTALLATION )
12
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13
ADD ENGINE COOLANT (See REPLACEMENT )
14
INSPECT FOR ENGINE COOLANT LEAK (See ON-VEHICLE INSPECTION )
15
INSTALL V-BANK COVER (See INSTALLATION )
16
INSTALL FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY (See INSTALLATION )
17
INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY (See INSTALLATION )
18
INSTALL NO. 1 ENGINE UNDER COVER (See INSTALLATION )
AIR INJECTION DRIVER
COMPONENTS
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ENG NE Emission Control (1GR-FE) - Tundra
Fig. 52: Identifying Air Injection Driver Components With Torque Specifications (1 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENG NE Emission Control (1GR-FE) - Tundra
Fig. 53: Identifying Air Injection Driver Components With Torque Specifications (2 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2
REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY
a
Disconnect the 4 air injection control driver connectors
NOTE:
Some systems need to be initialized after the cable is reconnected
(see INITIALIZATION ).
After the ignition switch is turned OFF, the navigation system
requires approximately 90 seconds to record various types of
memory and settings. As a result, after turning the ignition switch
OFF, wait 90 seconds or more before disconnecting the cable from
the negative (-) battery terminal.
2009 Toyota Tundra
2009 ENG NE Emission Control (1GR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст