Toyota Tundra. Manual — part 198
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection
Condition Specified Condition
K16-8 (FL+) - Body ground
Always
10 kohms or higher
K16-7 (FL-) - Body ground
K16-2 (FR+) - Body ground
K16-6 (FR-) - Body ground
K16-3 (RL+) - Body ground
K16-9 (RL-) - Body ground
K16-10 (RR+) - Body ground
K16-4 (RR-) - Body ground
K10-1 (+) - Body ground
K10-2 (-) - Body ground
K12-1 (+) - Body ground
K12-2 (-) - Body ground
O2-4 (+) - Body ground
O2-2 (-) - Body ground
O8-4 (+) - Body ground
O8-2 (-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Fig. 170: Checking Harness And Connector (Stereo Component Amplifier - Speaker)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: Go to Next Step
8. INSPECT FRONT NO. 3 SPEAKER LH
a. Disconnect the N1 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection Condition Specified Condition
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
NG: REPLACE FRONT NO. 3 SPEAKER LH (see REMOVAL )
Fig. 171: Identifying Front No.3 Speaker LH Harness
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
9. INSPECT FRONT NO. 3 SPEAKER RH
a. Disconnect the M1 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 3 SPEAKER RH (see REMOVAL )
Fig. 172: Identifying Front No.3 Speaker LH Harness
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
10. INSPECT FRONT NO. 2 SPEAKER LH
a. Disconnect the K12 speaker connector.
1 - 3
Always
2.5 to 3.5 ohms
Tester Connection Condition Specified Condition
1 - 3
Always
2.5 to 3.5 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 2 SPEAKER LH (see REMOVAL )
Fig. 173: Identifying K12 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
11. INSPECT FRONT NO. 2 SPEAKER RH
a. Disconnect the K10 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 2 SPEAKER RH (see REMOVAL )
Tester Connection Condition Specified Condition
3 (TWL+) - 4 (TWL-) Always
1.3 to 2.3 ohms
1 (+) - 3 (TWL+)
Always
Below 1 ohms
2(-) - 4(TWL-)
Tester Connection Condition Specified Condition
3(TWR+)-4(TWR-) Always
1.3 to 2.3 ohms
1 (+) - 3 (TWR+)
Always
Below 1 ohms
2 (-) - 4(TWR-)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст