Toyota Tundra. Manual — part 2117
Fig. 116: Identifying Fuel Sender Gauge Assembly Components With Torque Specifications (3 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
Fig. 117: Identifying Fuel Sender Gauge Assembly Components (4 Of 4)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
a. Remove the fuel suction with pump and gauge tube (see REMOVAL ).
2. REMOVE FUEL SENDER GAUGE ASSEMBLY
a. Disconnect the fuel sender gauge connector.
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
Fig. 118: Locating Fuel Sender Gauge Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.
Fig. 119: Pressing Down On Sender Gauge Claw Labeled A
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
a. Check that the float moves smoothly between F and E.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
FUEL SENDER GAUGE ASSEMBLY
If the value is not as specified, replace the fuel sender gauge assembly.
Tester Connection
Condition
Specified Condition
2-3
Float level is F (upper)
12 to 18 ohms
Float level is E (lower)
405 to 415 ohms
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
Fig. 120: Inspecting Fuel Sender Gauge Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALLATION
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
a. Set the sender gauge to the fuel sub tank. Then slide the sender gauge downward to install it.
b. Connect the fuel sender gauge connector.
Fig. 121: Setting Sender Gauge To Fuel Sub Tank
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
a. Install the fuel suction with pump and gauge tube (see INSTALLATION ).
2009 Toyota Tundra
2009 ENGINE Fuel (2UZ-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст