Toyota Tundra. Manual — part 2490
Fig. 67: Identifying Front Door Courtesy Light Switch LH And Main Body ECU Connector
Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT DOOR COURTESY LIGHT SWITCH LH MAIN BODY ECU
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE MAIN BODY ECU
4. INSPECT FRONT DOOR COURTESY LIGHT SWITCH RH
a. Remove the front door courtesy light switch RH (see REMOVAL ).
Tester Connection Condition Specified Condition
P5-1 - J4-24 (DCTY) Always
Below 1 ohms
P5-1 - Body ground
Always
10 kohms or higher
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
Fig. 68: Identifying Front Door Courtesy Light Switch RH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT DOOR COURTESY LIGHT SWITCH RH
NG: REPLACE FRONT DOOR COURTESY LIGHT SWITCH RH (See INSPECTION
PROCEDURE)
OK: Go to next step
5. CHECK HARNESS AND CONNECTOR (FRONT DOOR COURTESY LIGHT SWITCH RH
MAIN BODY ECU)
a. Disconnect the Q5 switch connector.
b. Disconnect the J3 ECU connector.
Tester Connection Switch Condition Specified Condition
1. Body ground
Not pushed
Below 1 ohms
Pushed
10 kohms or higher
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
Fig. 69: Identifying Front Door Courtesy Light Switch RH And Main Body ECU Connector
Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Measure the resistance according to the value(s) in the table below.
Standard resistance
FRONT DOOR COURTESY LIGHT SWITCH RH MAIN BODY ECU
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: REPLACE MAIN BODY ECU
6. INSPECT REAR DOOR COURTESY LIGHT SWITCH LH
a. Remove the rear door courtesy light switch LH (see REMOVAL ).
Tester Connection Condition Specified Condition
Q5-1 - J3-21 (PCTY) Always
Below 1 ohms
Q5-1 - Body ground
Always
10 kohms or higher
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
Fig. 70: Identifying Rear Door Courtesy Light Switch - LH
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
REAR DOOR COURTESY LIGHT SWITCH LH
NG: REPLACE REAR DOOR COURTESY LIGHT SWITCH LH (see REMOVAL )
OK: Go to next step
7. CHECK HARNESS AND CONNECTOR (REAR DOOR COURTESY LIGHT SWITCH LH
MAIN BODY ECU)
a. Disconnect the P6 switch connector.
Tester Connection Switch Condition Specified Condition
1 - Body ground
Not pushed
Below 1 ohms
Pushed
10 kohms or higher
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Lighting - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст