Toyota Tundra. Manual — part 833
Fig. 60: Identifying Front Valance Panel Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
10. INSTALL FRONT LOWER BUMPER RETAINER SUB-ASSEMBLY
a. Install the retainer with the 10 clips.
Fig. 61: Identifying Front Lower Bumper Retainer Sub-Assembly Clips And Retainer
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALLATION
HINT:
A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR
STANDARD BOLTS ).
1. INSTALL FRONT NO. 2 BUMPER EXTENSION SUB-ASSEMBLY LH
a. Install the bumper extension with the 4 nuts.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Fig. 62: Identifying Nuts And Bumper Extension
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Torque: 58 N*m (591 kgf*cm, 43 ft.*lbf)
2. INSTALL FRONT NO. 2 BUMPER EXTENSION SUB-ASSEMBLY RH
Fig. 63: Identifying Nuts And Bumper Extension
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINT:
Use the same procedures described for the LH side.
3. INSTALL FRONT BUMPER REINFORCEMENT
a. Install the reinforcement with the 6 nuts.
Torque: 71 N*m (724 kgf*cm, 51 ft.*lbf)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Fig. 64: Identifying Front Bumper Reinforcement Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. INSTALL FRONT BUMPER ARM LH
a. Install the bumper arm with the 3 nuts.
Torque: 58 N*m (591 kgf*cm, 43 ft.*lbf)
5. INSTALL FRONT BUMPER ARM RH
HINT:
Use the same procedures described for the LH side.
6. INSTALL FRONT BUMPER END RETAINER LH
a. Install the retainer with the 3 nuts.
Fig. 65: Identifying Front Bumper Reinforcement Nuts And Retainer
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
7. INSTALL FRONT BUMPER END RETAINER RH
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
HINT:
Use the same procedures described for the LH side.
8. INSTALL FRONT UPPER CENTER BUMPER RETAINER
a. Install the retainer with the 6 nuts.
Fig. 66: Identifying Front Upper Center Bumper Retainer And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
9. INSTALL FRONT BUMPER SIDE SUPPORT LH
a. Attach the 3 claws to install the side support.
b. Install the 2 screws.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
10. INSTALL FRONT BUMPER SIDE SUPPORT RH
Fig. 67: Identifying Front Bumper Side Support RH Screws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINT:
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст