Toyota Tundra. Manual — part 834
Use the same procedures described for the LH side.
11. INSTALL FRONT BUMPER BAR
a. w/o Fog Light:
Install the front bumper bar.
1. w/ Intuitive Parking Assist System:
Connect the ultrasonic sensor connectors.
2. Install the bumper bar with the 8 bolts and 7 screws.
Fig. 68: Identifying Bumper Bar With Bolts And Screws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Torque: for bolt
32 N*m (326 kgf*cm, 24 ft.*lbf)
for labeled A
3.4 N*m (35 kgf*cm, 30 in/lbf)
for labeled B
5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Install 2 new clips.
HINT:
Use the same procedures for the RH side and LH side.
b. w/ Fog Light:
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Install the front bumper bar.
Fig. 69: Identifying Front Bumper Bar Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
1. w/ Intuitive Parking Assist System:
Connect the ultrasonic sensor connectors.
2. Install the bumper bar with the 8 bolts and 3 screws.
Torque: for bolt
32 N*m (326 kgf*cm, 24 ft.*lbf)
for screw
3.4 N*m (35 kgf*cm, 30 in.*lbf)
Fig. 70: Identifying Front Bumper Bolts And Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
12. INSTALL FRONT BUMPER COVER SUB-ASSEMBLY
a. Attach the 4 claws and 2 pins to install the bumper cover.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Fig. 71: Identifying Claws & Pins
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Install the screw and clip.
Fig. 72: Identifying Screw & Clip
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINT:
Use the same procedures for the RH side and LH side.
c. Install the 16 bolts and 8 clips.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Fig. 73: Identifying Front Bumper Clips And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
13. INSTALL FRONT END PANEL LH
a. Attach the 2 pins to install the panel.
Fig. 74: Identifying Front End Panel LH Clips And Pins
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Install the 2 clips.
14. INSTALL FRONT END PANEL RH
HINT:
Use the same procedures described for the LH side.
15. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (w/ Fog Light)
a. Connect the fog light connector.
b. Install the clip.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст