Toyota Tundra. Manual — part 868
Fig. 14: Locating Outer Lap Belt Anchor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Detach the 7 clips and 2 claws, and remove the center pillar garnish.
Fig. 15: Identifying Center Pillar Garnish Claws And Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
19. REMOVE LOWER CENTER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.
20. REMOVE CENTER PILLAR GARNISH LH
a. Using a screwdriver, detach the 2 claws and remove the 2 assist grip plugs.
HINT:
Tape the screwdriver tip before use.
b. Remove the 2 bolts and assist grip.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
c. Remove the 2 screws.
d. Detach the claw.
e. Pass the front seat outer belt floor anchor through the center pillar garnish, and remove the center
pillar garnish.
Fig. 16: Identifying Center Pillar Garnish
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
21. REMOVE CENTER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.
22. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH
a. Detach the 6 claws of the plate, and slide the plate in the direction of the arrow to remove it.
Fig. 17: Identifying Front Shoulder Belt Anchor Plate Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
23. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
24. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY LH
a. Detach the 2 claws and remove the cover.
Fig. 18: Identifying Lower Quarter Trim Panel Assembly Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the bolt and outer lap belt anchor.
Fig. 19: Locating Outer Lap Belt Anchor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Detach the 6 clips and remove the quarter trim panel lower.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Fig. 20: Identifying Quarter Trim Panel Lower Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
25. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
26. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
a. Using a screwdriver, detach the claw and remove the cover.
HINT:
Tape the screwdriver tip before use.
Fig. 21: Identifying Protective Tape On Screwdriver
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the 2 bolts.
c. Detach the 4 clips.
d. Pass the rear seat outer belt floor anchor through the quarter trim panel, and remove the quarter trim
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст