Toyota Tundra. Manual — part 1991
Fig. 31: Identifying Cylinder Head Sub-Assembly RH Bolts Tightening Sequence
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
5
INSTALL VALVE STEM CAP
a
Apply a light coat of engine oil to the valve stem caps
b
Install the 16 valve stem caps to the cylinder head
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
6
INSTALL VALVE LASH ADJUSTER ASSEMBLY
a
Inspect the valve lash adjuster (see INSPECTION )
b
Install the 16 valve lash adjusters to the cylinder head
7
INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
a
Apply engine oil to the lash adjuster tips and valve stem cap ends
b
Install the valve rocker arms as shown in the illustration
NOTE:
Install the lash adjuster at the same place it was removed from.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 32: Identifying Valve Rocker Arm Position
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8
INSTALL CAMSHAFTS (for Bank 2)
a
Install the camshafts (see INSTALLATIONREMOVAL )
9
INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
a
Install the exhaust manifold RH (see INSTALLATION )
CYLINDER HEAD
COMPONENTS
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст