Toyota Tundra. Manual — part 2238

Fig. 272: Identifying Bearing Cap Bolts Loosening Sequence
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

d. Remove the 6 bearing caps.

HINT:

Arrange the removed parts in the correct order.

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra

e. Remove the No. 3 and No. 4 camshafts.

35. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY LH

a. Remove the camshaft housing by prying between the cylinder head and camshaft housing with a

screwdriver.

HINT:

Tape the screwdriver tip before use.

NOTE:

Be careful not to damage the contact surfaces of the cylinder head
and camshaft housing.

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra

Fig. 273: Removing Camshaft Housing
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

36. REMOVE CAMSHAFT BEARING CAP RH

a. Make sure that the knock pin of the camshaft is positioned as shown in the illustration.

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra

Fig. 274: Identifying Knock Pin Position
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Uniformly loosen and remove the 10 bearing cap bolts in the sequence shown in the illustration.

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra