Toyota Tundra. Manual — part 2239
Fig. 275: Locating Bearing Cap Bolts Loosening Sequence
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Uniformly loosen and remove the 18 bearing cap bolts in the sequence shown in the illustration.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 276: Locating Bearing Cap Bolts Loosening Sequence
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Remove the 6 bearing caps.
HINT:
NOTE:
Uniformly loosen the bolts while keeping the camshaft level.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Arrange the removed parts in the correct order.
e. Remove the No. 1 and No. 2 camshafts.
37. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY RH
a. Remove the camshaft housing by prying between the cylinder head and camshaft housing with a
screwdriver.
HINT:
Tape the screwdriver tip before use.
NOTE:
Be careful not to damage the contact surfaces of the cylinder head
and camshaft housing.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 277: Removing Camshaft Housing
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
38. REMOVE VALVE ROCKER ARM SUB-ASSEMBLY
a. Remove the 32 valve rocker arms from the cylinder head.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст