Toyota Tundra. Manual — part 2367
If the surface is dirty or burnt, correct it with sandpaper (No 400) or a lathe
d
Using a vernier caliper, measure the commutator diameter
Standard diameter:
35.0 mm (1.38 in.)
Minimum diameter:
34.0 mm (1.34 in.)
If the diameter is less than the minimum, replace the armature assembly
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Fig. 34: Measuring Commutator Diameter
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e
Using a dial indicator, measure the commutator runout
Maximum commutator runout:
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
0.05 mm (0.00197 in.)
If the commutator runout is more than the maximum, correct it using a lathe
Fig. 35: Measuring Commutator Runout
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
f
Measure the undercut depth of the commutator
Standard undercut depth:
0.7 mm (0.0276 in.)
Minimum undercut depth:
0.2 mm (0.00787 in.)
If the undercut depth is less than the minimum, correct it with a hacksaw blade
Fig. 36: Identifying Undercut Depth Of Commutator
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3
INSPECT BRUSH
a
Using a vernier caliper, measure the brush length
Standard length:
15.0 mm (0.591 in.)
Minimum length:
9.0 mm (0.354 in.)
If the brush length is less than the minimum, replace the brush holder and yoke assembly
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст