Toyota Tundra. Manual — part 2366
Fig. 31: Checking Starter Rotation
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2
INSPECT STARTER ARMATURE ASSEMBLY
a
Inspect the commutator for an open circuit
1
Measure the resistance according to the value(s) in the table below
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Standard Resistance
RESISTANCE SPECIFIED CONDITION
Tester Connection Condition Specified Condition
Commutator
Always
Below 1 ohms
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Fig. 32: Measuring Commutator Resistance
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
If the result is not as specified, replace the armature assembly
b
Inspect the commutator for a short circuit
1
Measure the resistance according to the value(s) in the table below
Standard Resistance
RESISTANCE SPECIFIED CONDITION
Tester Connection
Condition Specified Condition
Commutator - Armature coil core Always
10 kohms or higher
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Fig. 33: Measuring Commutator Resistance
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
If the result is not as specified, replace the armature assembly
c
Check the surface of the commutator for dirt and burns
2009 Toyota Tundra
2009 ENGINE Starting (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст