Toyota Tundra. Manual — part 606
Fig. 73: Identifying Ultrasonic Sensor Components (For Steel Type Bumper) (2 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 74: Identifying Ultrasonic Sensor Components With Torque Specification (For Resin Type Bumper)
(1 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 75: Identifying Ultrasonic Sensor Components (For Resin Type Bumper) (2 Of 2)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
Some systems need to be initialized after the cable is reconnected
(see INITIALIZATION ).
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
2. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH (for Resin Type Bumper) (See
REMOVAL )
3. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH (See REMOVAL )
4. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH (for Resin Type Bumper) (See
REMOVAL )
5. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH (See REMOVAL )
6. REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH (See REMOVAL )
7. REMOVE REAR BUMPER PLATE LH (See REMOVAL )
8. REMOVE REAR BUMPER PLATE RH (See REMOVAL )
9. REMOVE REAR BUMPER COVER (for Resin Type Bumper) (See REMOVAL )
10. REMOVE REAR BUMPER BAR (See REMOVAL )
11. REMOVE NO. 1 ULTRASONIC SENSOR
Fig. 76: Pushing Down Lever With Finger To Releasing Claw
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. While pushing down on the lever with a finger to release the one claw, detach the claw on the other
side to remove the ultrasonic sensor.
HINT:
The type of claw on the top and bottom of the sensor are different. Observe the claws carefully
before removing the sensor.
12. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER
a. Detach the 2 claws and remove the sensor retainer from the rear bumper.
After the ignition switch is turned OFF, the navigation system
requires approximately 90 seconds to record various types of
memory and settings. As a result, after turning the ignition switch
OFF, wait 90 seconds or more before disconnecting the cable from
the negative (-) battery terminal.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст