Toyota Tundra. Manual — part 607
Fig. 77: Identifying Sensor Retainer Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
13. REMOVE NO. 2 ULTRASONIC SENSOR
Fig. 78: Pushing Down Lever With Finger To Releasing Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. While pushing down on the lever with a finger to release the one claw, detach the claw on the other
side to remove the ultrasonic sensor.
HINT:
The type of claw on the top and bottom of the sensor are different. Observe the claws carefully
before removing the sensor.
14. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER
a. Detach the 2 claws and remove the sensor retainer from the rear bumper.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 79: Identifying Sensor Retainer Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
INSTALLATION
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
a. Align the keyhole and protrusion as shown in the illustration.
Fig. 80: Identifying Keyhole And Protrusion
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Install the sensor retainer to the rear bumper.
2. INSTALL NO. 1 ULTRASONIC SENSOR
a. Attach the 2 claws to install the ultrasonic sensor.
NOTE:
Do not damage the bumper with the protrusion when installing the
retainer.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 81: Identifying Claws To Installing Ultrasonic Sensor
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
a. Align the keyhole and protrusion as shown in the illustration.
Fig. 82: Identifying Keyhole And Protrusion
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Install the sensor retainer to the rear bumper.
4. INSTALL NO. 2 ULTRASONIC SENSOR
NOTE:
Do not damage the bumper with the protrusion when installing the
retainer.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Fig. 83: Attaching Claws To Installing Ultrasonic Sensor
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. Attach the 2 claws to install the ultrasonic sensor.
5. INSTALL REAR BUMPER BAR (See REASSEMBLY
6. INSTALL REAR BUMPER COVER (for Resin Type Bumper) (See INSTALLATION )
7. INSTALL REAR BUMPER PLATE RH (See INSTALLATION )
8. INSTALL REAR BUMPER PLATE LH (See INSTALLATION )
9. INSTALL REAR BUMPER PAD SUB-ASSEMBLY LH (See INSTALLATION )
10. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH (See INSTALLATION )
11. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH (for Resin Type Bumper) (See
INSTALLATION )
12. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH (See INSTALLATION )
13. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH (for Resin Type Bumper) (See
INSTALLATION )
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
TELEVISION CAMERA
COMPONENTS
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Parking Assist/Monitoring - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст