Toyota Tundra. Manual — part 2296
Fig. 49: Locating O-Rings
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
20
REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE (See REMOVAL )
21
DISCONNECT VANE PUMP ASSEMBLY
a
Remove the 2 bolts and disconnect the vane pump
Fig. 50: Locating Vane Pump Assembly Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
22
REMOVE GENERATOR ASSEMBLY
a
Disconnect the generator connector
Fig. 51: Locating Generator Connector And Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
b
Remove the terminal cap and nut, and disconnect the generator wire
c
Remove the bolt and disconnect the wire harness bracket from the generator
Fig. 52: Locating Wire Harness Bracket Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d
Remove the 2 bolts, 2 nuts and generator
Fig. 53: Locating Generator Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e
Remove the 2 stud bolts
23
REMOVE NO. 1 WATER BY-PASS HOSE
a
Remove the No 1 water by-pass hose by disconnect the hose from the water inlet housing and front
water by-pass joint
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
Fig. 54: Locating No. 1 Water By-Pass Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
24
REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY
a
Remove the bolt and disconnect the air tube
Fig. 55: Locating Air Tube With Mounting Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Disconnect the 2 hoses
c
Remove the 2 bolts and water by-pass pipe
Fig. 56: Locating Hoses, Water By-Pass Pipe And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
25
REMOVE FRONT WATER BY-PASS JOINT
a
Disconnect the No 2 water by-pass hose from the water by-pass joint
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
Fig. 57: Locating No. 2 Water By-Pass Hose With Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the 4 nuts, water by-pass joint and 2 gaskets
26
REMOVE NO. 2 ENGINE COVER (See REMOVAL )
27
REMOVE NO. 1 ENGINE COVER (See REMOVAL )
28
REMOVE AIR TUBE SUB-ASSEMBLY
a
Remove the bolt, disconnect the 2 hoses, and remove the air tube
Fig. 58: Locating Air Tube Sub-Assembly Bolts And Hoses
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
29
REMOVE WATER INLET HOUSING
a
Remove the 3 bolts, water inlet housing and gasket
Fig. 59: Locating Water Inlet Housing Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
30
REMOVE WATER PUMP PULLEY
a
Using SST, hold the water pump pulley
SST 09960-10010 (09962-01000, 09963-01000)
b
Remove the 4 bolts and water pump pulley
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст