Toyota Prius Prime (2020 year). Owner's manual — part 11

168

2-2. Charging

After setting operations are
complete, press

.

A confirmation screen of chang-
ing “Next Charging Event” will
display.

Press

or

of the meter

control switches to select “Yes”,
and then press

to save the

timer settings.
Press

to return to the previous screen.

When canceling the “Next Charging Event”, select “No” and then press

.

■

Charging timer switch

●

The charging timer switch functions regardless of the condition of the power
switch.
However, when the charging timer switch is pressed while the power switch
is not turned to ON mode, if the meter control switches are not operated for
a certain amount of time after the charging timer setting screen is displayed,
the display automatically turns off.

●

The charging timer switch cannot be used while driving.

■

When charging timer setting operations are canceled
When the vehicle is in the following conditions, charging timer setting opera-
tions are canceled.

●

A message is displayed while performing a setting operation

●

The power switch is operated before the settings are confirmed

●

The vehicle starts off

●

When a display with a higher priority than that of the timer charging setting
is shown

■

Timer settings
The “Charge Schedule” screen can be displayed and setting operations can
be performed from the “Vehicle Settings” setting on the multi-information dis-
play. (

P. 741)

■

“Next Charging Event”
After charging completes, the “Next Charging Event” displayed on the multi-
information display will not change until the charging cable is removed, even
after charging is performed according to the “Next Charging Event” schedule.

4

169

2-2. Charging

2

Plug-

in hybrid system

■

To return to original setting after changing “Next Charging Event” set-
ting
Turning the setting of “Charge Now” on and then off can return the setting of
“Next Charging Event” to its original setting.

■

When “Next Charging Event” is changed while charging

●

When the charging mode is “Departure”, the current charging is interrupted
or continued depending on the remaining time until the charging is com-
pleted.

●

When the charging mode is “Start”, the current charging is interrupted, the
next charging will start at the set time.

■

When the power switch is turned off

*

2

: When the power switch is turned off, the “Next Charging Event” confirma-

tion screen may be displayed.

It is possible to check the next charge
schedule (“Next Charging Event”) by oper-
ating

or

of the meter control

switches while the power switch is turned
off and the “Ending” screen

*

1

(

P. 196) is

displayed.

*

2

*

1

: The “Ending” screen may not be dis-

played during charging.

WARNING

■

Cautions while performing the setting operation
When performing the setting operation while the hybrid system is operated,
ensure that the vehicle is parked in a place with adequate ventilation. In a
closed area such as a garage, exhaust gases including harmful carbon
monoxide (CO) may collect and enter the vehicle. This may lead to death or
a serious health hazard.

NOTICE

■

While performing the setting operation
When performing the setting operation while the hybrid system is stopped,
be careful that the 12-volt battery will not be discharged.

170

2-2. Charging

Setting operations related to the charging timer are performed on the
“Charge Schedule” screen.

For details on how to operate the 11.6-inch display, refer to “NAVIGATION
SYSTEM OWNER’S MANUAL”.

■

Displaying the “Charge Schedule” screen

Press the “MENU” button to
display the menu screen.

Select “Info” and “Charge
Schedule”, in that order.

The “Charge Schedule” screen
will display.

Setting operations on the 11.6-inch display (if equipped)

1

2

171

2-2. Charging

2

Plug-

in hybrid system

■

How to read the “Charge Schedule” screen

Charge schedules (calendar display)

Displays the week-long registered charge schedule in a list using icons.

“Add” button

Press to add a new item to the charge schedule. (

P. 172)

Charge schedules (list display)

A list of items on the registered charge schedule is displayed. If there are
more than 3 registered items, the list can be scrolled up and down to
change the displayed items.

“Edit” button

Press to change or delete registered items on the charge schedule.
(

P. 174)

Return button

Press to close the “Charge Schedule” screen.

Charge schedules (icon display)

When an item is registered on the charge schedule, an icon is displayed
on the calendar.

“Charge Now” button

Press to set “Charge Now” to on. (

P. 175)

1

2

3

4

5

6

7

172

2-2. Charging

“ON”/“OFF” button

The charge schedule switches between “ON” and “OFF” each time this
button is pressed. (

P. 174)

Scroll bar

When the number of registered charge schedules exceeds 3, the dis-
played contents can be changed by operating the button.

Main content displayed on the calendar:

*

1

: A row with a red line indicates the current time.

*

2

: While a registered setting is being changed, the icon of the related setting

is highlighted (except when the icon overlaps with another icon).

*

3

: When “Charge Now” (

P. 175) is set to on, the orange icon moves to the

position of the red line and changes to display “Charge Now”.

*

4

: The content of the charge schedule that corresponds to the “Next Charging

Event” is not displayed in the list.

■

Registering the charge schedule

Display the “Charge Schedule” screen. (

P. 170)

Press “Add”.

The settings screen will display on the bottom of the screen.

8

9

Display

Content

Red line

*

1

Current time

Orange icon

*

2, 3

Charge schedule for “Next Charging Event”

*

4

Green icon

*

2

The charging mode is set to “Departure”

Blue icon

*

2

The charging mode is set to “Start”

1

2

173

2-2. Charging

2

Plug-

in hybrid system

Select the charging mode.

Press “Start” or “Departure” to turn the button (charging mode) on and
highlight the button.

Operate the time setting wheel to set the start (or departure)
time.

When the charging mode is “Start”, set the charging start time (start
time). When it is “Departure”, set the charging end time (departure
time).
Operate the each wheel up and down to display the desired time in the
center.

When activating the repeated settings, press the desired day but-
ton.

Each time the button is pressed, the repeated setting for the selected
day switches between on and off.
When turned on, the button is highlighted and the charging timer is
repeated on that day. It is possible to turn more than one day on.
If no buttons are turned on, charging is only carried out once according
to the timer for the next 24 hours.

When the charging mode is set to “Departure”, set the “Climate
Prep” (

P. 157) to on or off.

To operate the air conditioning, press the “Climate Prep” button to set
the function to “ON”.
Each time the button is pressed, the function switches between “ON”
and “OFF”.

After setting operations are complete, press “Save”.

The charge schedule is added to the list and an icon is added to the cal-
endar.
To cancel registration of the timer settings, press

.

After setting operations are complete, when the power switch is turned
off and the charging cable is connected to the vehicle, charging is car-
ried out according to the charging timer settings.

3

4

5

6

7

174

2-2. Charging

■

Switching charge schedules between “ON” and “OFF”

Display the “Charge Schedule” screen. (

P. 170)

From the items in the list displayed on the bottom of the screen,
press “ON” or “OFF” in the row of the charge schedule you wish
to change.

Setting “ON” or “OFF” is possible by sliding the bar to the left or right.
If the charge schedule you wish to change is not displayed on the bot-
tom of the screen, scroll the list up and down to display it.
Each time the button is pressed, the charge schedule switches between
“ON” and “OFF”.

■

Changing the registered charge schedules

Display the “Charge Schedule” screen. (

P. 170)

From the items displayed on the bottom of the screen, press
“Edit” in the row of the charge schedule you wish to change.

The settings screen will display on the bottom of the screen.
It is also possible to display the settings screen by pressing the icon of
the charge schedule you wish to change from those displayed on the
calendar.

1

2

1

2

175

2-2. Charging

2

Plug-

in hybrid system

● Changing registered items:

Change the desired settings as described in step

to step

of

the “Registering the charge schedule” procedure. (

P. 172)

When a setting is changed, its icon on the calendar also changes.

● Deleting registered items:

Press “Delete”.

A deletion confirmation message will display.
Press “Yes” to delete the selected charge schedule.
To cancel deletion, press “No”.
When a charge schedule is deleted, its icon is also deleted from the cal-
endar.

■

Turning “Charge Now” on
The “Charge Now” setting can be changed by performing one of the
two following procedures.



Operations on “Charge Schedule” screen
Display the “Charge Schedule” screen. (

P. 170)

Press “Charge Now”.

Each time the button is pressed, “Charge Now” switches between on
and off and the indicator on the button turns on and off.

3

7

1

2

176

2-2. Charging



Operation on ending screen
Turn the power switch off.

The ending screen is displayed on the 11.6-inch display.

While the ending screen is
displayed, press “Charge
Now”.

Each time the button is pressed,
“Charge Now” switches between
on and off and the indicator on
the button turns on and off.

After setting operations are complete, charging starts when the
charging cable is connected. (

P. 146)

1

2

177

2-2. Charging

2

Plug-

in hybrid system

■

Changing “Next Charging Event”

*

*

: When “Charge Now” is turned on etc., the registered “Next Charging

Event” cannot be changed.

Display the “Charge Schedule” screen. (

P. 170)

“Next Charging Event” is displayed on the “Charge Schedule” screen
with an orange icon.

To change “Next Charging Event”, press the orange

.

*

The settings screen will display on the bottom of the screen.

*

: Icons are displayed differently according to the type of charging mode.

(

P. 172)

Select the desired charging mode.

Press “Start” or “Departure” to turn the button (charging mode) on and
highlight the button.

Operate the day setting wheel and time setting wheels up and
down to set the charging day and start (or departure) time.

Operate each wheel up and down to display the desired date and time
in the center.
When the charging mode is “Start”, set the charging start time. When it
is “Departure”, set the charging end time.

When the charging mode is set to “Departure”, set the “Climate
Prep” (

P. 157) to on or off.

To operate the air conditioning, press the “Climate Prep” button to set
the function to “ON”.
Each time the button is pressed, the function switches between “ON”
and “OFF”.

After setting operations are complete, press “Save”.

The charging timer settings are saved and icons are added to the
charge schedule.
To cancel changing “Next Charging Event”, press

.

1

2

3

4

5

6

178

2-2. Charging

■

When charging timer setting operations are canceled
When the vehicle is in the following conditions, charging timer setting opera-
tions are canceled.

●

The power switch is turned off before the settings are confirmed

●

The vehicle starts off

●

When a display with a higher priority than that of the timer charging setting
is shown

■

“Next Charging Event”
After charging completes, the “Next Charging Event” displayed on the display
will not change until the charging cable is removed, even after charging is
performed according to the “Next Charging Event” schedule.

■

To return to original setting after changing “Next Charging Event” set-
ting
Turning the setting of “Charge Now” on and then off can return the setting of
“Next Charging Event” to its original setting.

■

When “Next Charging Event” is changed while charging

●

When the charging mode is “Departure”, the current charging is interrupted
or continued depending on the remaining time until the charging is com-
pleted.

●

When the charging mode is “Start”, the current charging is interrupted, the
next charging will start at the set time.

■

Displaying advice related to charge schedule settings
When “?” is pressed on the “Edit Charging Event” screen (

P. 173), an

explanation of the setting item on the “Edit Charging Event” screen will dis-
play.

179

2-2. Charging

2

Plug-

in hybrid system

■

When the power switch is turned off
The next charge schedule (“Next
Charging Event”) can be checked on the
ending screen

*

that is displayed when the

power switch is turned off.

*

: The ending screen may not be dis-

played during charging.

WARNING

■

Cautions performing the setting operation
As the hybrid system needs to be operating during setting up the display,
ensure that the vehicle is parked in a place with adequate ventilation. In a
closed area such as a garage, exhaust gases including harmful carbon
monoxide (CO) may collect and enter the vehicle. This may lead to death or
a serious health hazard.

NOTICE

■

While performing the setting operation
To prevent 12-volt battery discharge, ensure that the hybrid system is oper-
ating while setting up the display features.

180

2-2. Charging

When normal charging cannot be carried

out

Refer to the following table and carry out the appropriate correction
procedure.

When charging does not start, even though the normal proce-
dure is followed, check each of the following items.

If a message is shown on the multi-information display, also refer to
P. 185.

When normal charging cannot be carried out

Likely cause

Correction procedure



The power source indicator on the CCID (Charging Circuit Interrupting
Device) does not illuminate, even though the plug is connected to an
external power source.

Plug is not properly con-
nected to outlet

Check that the plug is properly connected to
the outlet.

Power is out

After power is restored, carry out the
charging procedure again.

Building breaker is tripped
and power is cut off

Check that the breaker is connected and if
there is no malfunction, check if the vehicle
can be charged through another outlet.
If charging is possible, the first outlet may
have a malfunction. Contact the building or
facility manager, or an electrician.

Short circuit between CCID
(Charging Circuit Interrupting
Device) and plug

Immediately stop charging and contact your
Toyota dealer.

181

2-2. Charging

2

Plug-

in hybrid system



The error warning indicator on the CCID (Charging Circuit Interrupting
Device) flashes.

Electrical leakage detection
function or self- diagnostic
function operates and power
is cut off

When the voltage is insufficient, the error
warning indicator may flash when there is
noise interference. Perform a reset and con-
nect to a proper power source. (

P. 118)

If charging does not start, immediately stop
charging and contact your Toyota dealer.



Charging indicator does not illuminate, even though charging connector
is connected.

The plug is not properly con-
nected to the outlet

Check whether the plug is properly con-
nected to the outlet.

Charging connector is not
securely

connected

to

charging inlet

Check the connection status of the charging
connector.
• When connecting the charging connec-

tor, make sure not to touch the latch
release button. Insert the charging con-
nector securely until you hear a click. The
charging connector may not be connected
correctly if the latch release button is
pressed while inserting.

• After connecting the charging connector,

check that the latch release button is not
pressed and the charging indicator is
turned on.

If the charging indicator does not illuminate,
even though the charging connector is
securely connected, there may be a mal-
function in the system. Immediately stop
charging and contact your Toyota dealer.

Hybrid battery (traction bat-
tery) is already fully charged

When the hybrid battery (traction battery) is
fully charged, charging is not performed.

The charging equipment
does not operate

Please contact the facility manager when
there is a problem with charging equipment.

Likely cause

Correction procedure

182

2-2. Charging

*

: Refer to P. 114 for details regarding charging indicator illumination and

flashing.

Refer to the following table and carry out the appropriate correction
procedure.



Charging indicator flashes and charging cannot be carried out.

When charging indicator
flashes

*

:

Charge schedule is regis-
tered

When you wish to charge according to the
timer, wait until the set time.
To start charging, set “Charge Now” to “On”.
(

P. 166, 175)

When charging indicator rap-
idly flashes

*

:

Malfunction occurred in an
external power source or the
vehicle

Start the hybrid system and follow the
instructions displayed by the message on
the multi-information display. (

P. 185)

When charging timer function does not operate normally

Likely cause

Correction procedure



Cannot charge at desired time

Vehicle clock is not properly
adjusted

Check the clock settings and adjust it to the
proper time. (

P. 197)

The vehicle calendar is not
set correctly.

Check the calendar setting and set it to the
correct date. (

P. 199)

Charging cable is not con-
nected to vehicle

Before using the charging timer, connect the
charging cable.

Incorrect charging mode
selected

Check the charging mode setting. (

P. 157)

When the charging mode is “Start”, charging
starts at the set time, but when it is “Depar-
ture”, charging is completed by the set time.
(The charging start time is automatically
controlled by the system.)



Cannot change timer setting from smartphone application (vehicles with
11.6-inch display)

*

Smartphone is outside its
coverage area

Check the signal strength. If the smart-
phone is outside its coverage area, move to
a place with a better signal.

Likely cause

Correction procedure

183

2-2. Charging

2

Plug-

in hybrid system



Charging starts, even though charge schedule is registered

“Charge Now” is set to “On”

When charging according to the timer, set
“Charge Now” to “Off”. (

P. 166, 175)

Charge schedule is set to
“Off”

Check that charge schedule is not set to
“Off”. (

P. 164, 174)

Charging mode is set to
“Departure” and schedule
departure time is close to
current time

When the system determines that there is
no time to finish charging by the set sched-
uled departure time, it starts charging.
Check the charge schedules.

Charging

cable

was

removed

and

reinserted

while charging indicator was
flashing

If the charging cable is removed and rein-
serted while the charging indicator is flashing,
the charging timer is canceled (

P. 149).

Temporarily remove the charging cable, and
then reconnect it.

The Remote Air Conditioning
System was operated

When the Remote Air Conditioning System
is operated, the system will start charging,
even if the charge schedule is registered. To
carry out charging using the timer, stop the
Remote Air Conditioning System, and then
reconnect the charging cable.

“Traction Battery Heater”
(

P. 135) operated

When the charging mode is set to “Depar-
ture”, “Traction Battery Heater” may operate
before charging starts. Check the status of
the charging indicator. (

P. 114)

Outside temperature is low
and hybrid battery (traction
battery) warming control
(

P. 136) operated

(Alaska and Canada only)

When hybrid battery (traction battery)
warming control operates, the timer settings
are ignored and charging starts. In order to
protect the hybrid battery (traction battery),
allow charging to continue.

Likely cause

Correction procedure