Toyota Tundra (2015 year). Manual — part 618
29. INSPECT NO. 2 1-WAY CLUTCH ASSEMBLY
30. REMOVE NO. 2 1-WAY CLUTCH ASSEMBLY
(a) Remove the No. 2 1-way clutch and clutch drum thrust washer
from the clutch drum and input shaft assembly.
31. FIX CLUTCH DRUM AND INPUT SHAFT ASSEMBLY
(a) Place the oil pump onto the torque converter clutch, and then
place the clutch drum and input shaft assembly onto the oil
pump.
32. REMOVE REVERSE CLUTCH HUB SUB-ASSEMBLY
(a) Using a screwdriver, remove the snap ring.
(b) Remove the reverse clutch reaction sleeve and reverse clutch
hub sub-assembly with the rear clutch disc set from the clutch
drum.
33. REMOVE REAR CLUTCH DISC SET
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Remove the selective reverse clutch flange, 5 discs and 4 plates from the reverse clutch hub.
(b) Remove the reverse clutch flange from the clutch drum.
34. INSPECT REAR CLUTCH DISC
35. INSPECT REVERSE CLUTCH HUB SUB-ASSEMBLY
36. REMOVE FORWARD CLUTCH HUB SUB-ASSEMBLY
(a) Remove the thrust needle roller bearing, forward clutch hub and
No. 3 clutch hub thrust washer from the clutch drum.
37. INSPECT FORWARD CLUTCH HUB SUB-ASSEMBLY
38. REMOVE COAST CLUTCH HUB SUB-ASSEMBLY WITH
NO. 4 1-WAY CLUTCH ASSEMBLY
(a) Remove the 2 thrust needle roller bearings, coast clutch hub
with the No. 4 1-way clutch and thrust bearing race from the
clutch drum.
39. INSPECT NO. 4 1-WAY CLUTCH ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
40. REMOVE NO. 4 1-WAY CLUTCH ASSEMBLY
(a) Separate the No. 4 1-way clutch from the coast clutch hub.
(b) Remove the No. 2 clutch hub thrust washer from the coast
clutch hub.
41. REMOVE FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC SET
(a) Using a screwdriver, remove the hole snap ring.
(b) Remove the flange, 6 discs, 6 plates and cushion plate from the
input shaft.
42. INSPECT FORWARD MULTIPLE DISC CLUTCH CLUTCH DISC
43. REMOVE COAST CLUTCH DISC SET
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Using a screwdriver, remove the hole snap ring.
(b) Remove the flange, 4 discs and 4 plates from the input shaft.
44. INSPECT COAST CLUTCH DISC
45. REMOVE INPUT SHAFT SUB-ASSEMBLY
(a) Remove the input shaft from the clutch drum.
46. REMOVE INPUT SHAFT OIL SEAL RING
(a) Remove the 4 oil seal rings from the input shaft.
47. REMOVE COAST CLUTCH PISTON
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст