Toyota Tundra (2015 year). Manual — part 619
(a) Place SST on the No. 1 clutch balancer, and compress the return spring with a press.
SST: 09350-30020
09350-07040
(b) Using SST, remove the snap ring.
SST: 09350-30020
09350-07070
(c) Remove the No. 1 clutch balancer and forward clutch return
spring from the input shaft.
(d) Remove the O-ring from the No. 1 clutch balancer.
(e) Hold the coast clutch piston by hand and apply compressed air
to the input shaft to remove the coast clutch piston.
48. INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY
49. REMOVE FORWARD CLUTCH PISTON SUB-ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Hold the forward clutch piston by hand and apply compressed air to the input shaft to remove the forward
clutch piston.
(b) Remove the O-ring from the input shaft.
50. INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY
51. REMOVE DIRECT CLUTCH DISC SET
(a) Using a screwdriver, remove the 2 hole snap rings from the clutch drum.
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(b) Remove the direct clutch flange, 5 discs and 5 plates from the
clutch drum.
52. INSPECT DIRECT CLUTCH DISC
53. REMOVE NO. 3 CLUTCH BALANCER
(a) Place SST on the No. 3 clutch balancer, and compress the return spring with a press.
SST: 09380-60010
09381-06020
09381-06030
09381-06040
09381-06050
09381-06080
09381-06070
(b) Using SST, remove the snap ring.
SST: 09350-30020
09350-07070
(c) Remove the No. 3 clutch balancer.
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(d) Remove the reverse clutch return spring and O-ring from the
reverse clutch piston sub-assembly.
54. INSPECT REVERSE CLUTCH RETURN SPRING SUB-ASSEMBLY
55. REMOVE REVERSE CLUTCH PISTON SUB-ASSEMBLY
(a) Remove the reverse clutch piston from the clutch drum.
(b) Remove the O-ring from the reverse clutch piston.
(c) Remove the O-ring from the clutch drum.
56. REMOVE DIRECT CLUTCH PISTON SUB-ASSEMBLY
AB60E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст