Toyota Tundra (2015 year). Manual — part 1163
OK
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
2.
CHECK HARNESS AND CONNECTOR (IGNITION COIL ASSEMBLY - ECM)
(a) Disconnect the ignition coil assembly connector.
(b) Disconnect the ECM connector.
(c) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
D10-2 (IGF1) - D74-104 (IGF1)
Always
Below 1 Ω
D25-2 (IGF2) - D74-105 (IGF2)
Always
Below 1 Ω
D12-2 (IGF2) - D74-105 (IGF2)
Always
Below 1 Ω
D23-2 (IGF1) - D74-104 (IGF1)
Always
Below 1 Ω
D14-2 (IGF2) - D74-105 (IGF2)
Always
Below 1 Ω
D21-2 (IGF1) - D74-104 (IGF1)
Always
Below 1 Ω
D16-2 (IGF1) - D74-104 (IGF1)
Always
Below 1 Ω
D19-2 (IGF2) - D74-105 (IGF2)
Always
Below 1 Ω
D10-3 (IGT1) - D74-40 (IGT1)
Always
Below 1 Ω
D25-3 (IGT2) - D74-33 (IGT2)
Always
Below 1 Ω
D12-3 (IGT3) - D74-37 (IGT3)
Always
Below 1 Ω
D23-3 (IGT4) - D74-34 (IGT4)
Always
Below 1 Ω
D14-3 (IGT5) - D74-35 (IGT5)
Always
Below 1 Ω
D21-3 (IGT6) - D74-36 (IGT6)
Always
Below 1 Ω
D16-3 (IGT7) - D74-38 (IGT7)
Always
Below 1 Ω
D19-3 (IGT8) - D74-39 (IGT8)
Always
Below 1 Ω
D10-2 (IGF1) or D74-104 (IGF1) -
Body ground
Always
10 kΩ or higher
D25-2 (IGF2) or D74-105 (IGF2) -
Body ground
Always
10 kΩ or higher
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P0351-P0358; ...
OK
TESTER CONNECTION
CONDITION
SPECIFIED
CONDITION
D12-2 (IGF2) or D74-105 (IGF2) -
Body ground
Always
10 kΩ or higher
D23-2 (IGF1) or D74-104 (IGF1) -
Body ground
Always
10 kΩ or higher
D14-2 (IGF2) or D74-105 (IGF2) -
Body ground
Always
10 kΩ or higher
D21-2 (IGF1) or D74-104 (IGF1) -
Body ground
Always
10 kΩ or higher
D16-2 (IGF1) or D74-104 (IGF1) -
Body ground
Always
10 kΩ or higher
D19-2 (IGF2) or D74-105 (IGF2) -
Body ground
Always
10 kΩ or higher
D10-3 (IGT1) or D74-40 (IGT1) -
Body ground
Always
10 kΩ or higher
D25-3 (IGT2) or D74-33 (IGT2) -
Body ground
Always
10 kΩ or higher
D12-3 (IGT3) or D74-37 (IGT3) -
Body ground
Always
10 kΩ or higher
D23-3 (IGT4) or D74-34 (IGT4) -
Body ground
Always
10 kΩ or higher
D14-3 (IGT5) or D74-35 (IGT5) -
Body ground
Always
10 kΩ or higher
D21-3 (IGT6) or D74-36 (IGT6) -
Body ground
Always
10 kΩ or higher
D16-3 (IGT7) or D74-38 (IGT7) -
Body ground
Always
10 kΩ or higher
D19-3 (IGT8) or D74-39 (IGT8) -
Body ground
Always
10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
3.
CHECK WHETHER DTC OUTPUT RECURS (DTC P0351, P0352, P0353, P0354, P0355,
P0356, P0357 OR P0358)
(a) Connect the Techstream to the DLC3.
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P0351-P0358; ...
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Clear DTCs
.
Do not shuffle the connectors.
(f) Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.
(g) Check DTCs displayed on the Techstream.
Result
RESULT
PROCEED TO
Same DTC is output
A
Different ignition coil DTC is output
B
HINT:
Perform "Inspection After Repair" after replacing the ignition coil assembly
.
B
REPLACE IGNITION COIL ASSEMBLY
A
REPLACE ECM
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P0351-P0358; ...
Last Modified: 9-16-2014
6.6 C
Doc ID: RM000000YTB0KKX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P0365,P0367,P0368,P0390,P0392,P0393; Camshaft
Position Sensor "B" Circuit (Bank 1); 2015 MY Tundra [08/2014 - ]
DTC
P0365
Camshaft Position Sensor "B" Circuit (Bank 1)
DTC
P0367
Camshaft Position Sensor "B" Circuit Low Input (Bank 1)
DTC
P0368
Camshaft Position Sensor "B" Circuit High Input (Bank 1)
DTC
P0390
Camshaft Position Sensor "B" Circuit (Bank 2)
DTC
P0392
Camshaft Position Sensor "B" Circuit Low Input (Bank 2)
DTC
P0393
Camshaft Position Sensor "B" Circuit High Input (Bank 2)
DESCRIPTION
The exhaust camshaft has a sensor plate with 3 teeth on its outer circumference. When the exhaust camshaft
rotates, changes occur in the air gaps between the 3 teeth and MRE, which affects the magnet. As a result, the
DTC
NO.
DTC DETECTION CONDITION
TROUBLE AREA
P0365
P0390
No VVT sensor signal to ECM at engine speed
Open or short in VVT sensor (for exhaust
Exhaust camshaft
Timing chain jumped tooth
ECM
P0367
P0392
(1 trip detection logic)
Open or short in VVT sensor (for exhaust
Exhaust camshaft
Timing chain jumped tooth
1UR-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P0365,P0367,...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст