Toyota Tundra (2015 year). Manual — part 2758
(b) Install the pressure feed tube clamp with the 2 bolts.
Torque:
28 N·m {286 kgf·cm, 21ft·lbf}
(c) Using a union nut wrench, tighten the pressure feed tube
(pressure feed tube side).
Torque:
25 N·m {255 kgf·cm, 18ft·lbf}
NOTICE:
Use the formula calculate special torque values for situations for
situations where a union nut wrench is combined with a torque
wrench
.
(d) Using a union nut wrench, tighten the pressure feed tube
(return tube side).
Torque:
25 N·m {255 kgf·cm, 18ft·lbf}
NOTICE:
Use the formula calculate special torque values for situations for
situations where a union nut wrench is combined with a torque
wrench
.
3. CONNECT TIE ROD END SUB-ASSEMBLY LH
(a) Connect the tie rod end LH to the steering knuckle with the nut.
Torque:
69 N·m {704 kgf·cm, 51ft·lbf}
(b) Install a new cotter pin.
HINT:
Further tighten the nut up to 60° if the holes for the cotter pin are not aligned.
4. CONNECT TIE ROD END SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
POWER STEERING: STEERING GEAR: INSTALLATION; 2015 MY...
5. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT
SUB-ASSEMBLY
(a) Align the matchmarks on the No. 2 steering intermediate shaft
and power steering gear.
(b) Install the bolt.
Torque:
35 N·m {360 kgf·cm, 26ft·lbf}
6. INSTALL ENGINE ASSEMBLY
(a) for 3UR-FBE:
Install the engine assembly
.
(b) for 1UR-FE:
Install the engine assembly
.
(c) for 3UR-FE:
Install the engine assembly
.
7. INSTALL FRONT WHEEL
Torque:
for Aluminum Wheel -
131 N·m {1336 kgf·cm, 97ft·lbf}
for Steel Wheel -
209 N·m {2131 kgf·cm, 154ft·lbf}
8. BLEED POWER STEERING FLUID (for 1UR-FE)
9. BLEED POWER STEERING FLUID (for 3UR-FE, 3UR-FBE)
10. CHECK POWER STEERING FLUID LEVEL (for 1UR-FE)
11. CHECK POWER STEERING FLUID LEVEL (for 3UR-FE, 3UR-FBE)
12. INSPECT FOR POWER STEERING FLUID LEAK
13. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
HINT:
(a) Adjust the front wheel alignment
.
POWER STEERING: STEERING GEAR: INSTALLATION; 2015 MY...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM0000031M803WX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: POWER STEERING: VANE PUMP (for 1UR-FE): COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
POWER STEERING: VANE PUMP (for 1UR-FE): COMPONENTS; 20...
ILLUSTRATION
POWER STEERING: VANE PUMP (for 1UR-FE): COMPONENTS; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст