Toyota Tundra (2015 year). Manual — part 2436
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
REPLACE COMBINATION METER ASSEMBLY
METER: METER / GAUGE SYSTEM: Voltage Meter Malfunction; 201...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002W6F00TX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: MIRROR: INNER REAR VIEW MIRROR: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
ILLUSTRATION
MIRROR: INNER REAR VIEW MIRROR: COMPONENTS; 2015 MY T...
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000001HRW025X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: MIRROR: INNER REAR VIEW MIRROR: CALIBRATION; 2015 MY Tundra [08/2014 - ]
CALIBRATION
1. SELECT COMPASS DISPLAY MODE
(a) As each vehicle has its own magnetic field, calibration should be performed for each individual vehicle. This
(a) A compass could be magnetized during shipping by vessels or freight cars. Therefore, make sure to
perform calibration and ensure that calibration is performed properly before delivery. If this cannot be done
4. SET COMPASS
5. CALIBRATION SETTING MODE
MIRROR: INNER REAR VIEW MIRROR: CALIBRATION; 2015 MY T...
(a) Pressing the compass switch for 6 seconds in the normal mode
will activate the calibration setting mode. "CAL" is displayed on
the compass display.
HINT:
After the calibration is completed, it is not necessary to perform the above procedures unless the magnetic
field strength is drastically changed. If this happens, the azimuthal display will be changed to "CAL".
MIRROR: INNER REAR VIEW MIRROR: CALIBRATION; 2015 MY T...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст