Toyota Tundra (2015 year). Manual — part 2380
(a) Attach the 3 clips and 2 claws to install the instrument panel
speaker panel sub-assembly.
6. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH
7. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
HINT:
Use the same procedure described for the instrument panel speaker panel sub-assembly.
8. INSTALL FRONT PILLAR GARNISH LH
9. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
(a) for Double Cab:
(b) for CrewMax:
(c) for Regular Cab:
10. INSTALL FRONT PILLAR GARNISH RH
11. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure described for the LH side.
12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
(a) for 4WD:
Connect the connector.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
(b) Attach the 18 clips and wire harness clamp to install the center
instrument cluster finish panel sub-assembly.
13. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
14. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL WITH AIR
CONDITIONING CONTROL ASSEMBLY
(a) Connect each connector.
(b) Attach the 8 clips, 2 claws and guide to install the lower center instrument panel finish panel together with
the air conditioning control assembly.
Text in Illustration
*A for Automatic Air Conditioning System
*B for Manual Air Conditioning System
*1 Protective Tape
*2 Air Conditioning Control Assembly
*3 Lower Center Instrument Panel Finish Panel
-
-
15. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
(a) Attach the 3 claws and 4 clips to install the No. 2 instrument
cluster finish panel garnish.
16. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
(a) Attach the 4 claws to install the lower instrument panel finish
panel sub-assembly RH.
(b) Install the 4 screws <F> and bolt <A>.
17. INSTALL INSTRUMENT SIDE PANEL RH
(a) Attach the 4 guides and 3 claws to install the instrument side
panel RH.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
18. INSTALL NO. 4 INSTRUMENT REGISTER
SUB-ASSEMBLY
(a) Attach the 10 clips to install the No. 4 instrument register
sub-assembly.
19. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
20. INSTALL LOWER INSTRUMENT PANEL
(a) Attach the 3 claws to install the lower instrument panel.
(b) Install the bolt <A> and screw <D>.
21. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Attach the 2 guides, 4 claws and clip to install the No. 2 instrument panel under cover sub-assembly.
22. INSTALL COMBINATION METER ASSEMBLY
23. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
(a) Attach the 6 clips to install the instrument cluster finish panel assembly.
(b) Install the 2 clips.
24. INSTALL INSTRUMENT CLUSTER FINISH PANEL
ORNAMENT
(a) Attach the 3 clips and claw to install the instrument cluster finish
panel ornament.
25. INSTALL NO. 2 SWITCH HOLE BASE
(a) Connect each connector.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст