Toyota Tundra (2015 year). Manual — part 2378
Disconnect the connector.
30. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
(a) for Double Cab:
(b) for CrewMax:
(c) for Regular Cab:
31. REMOVE FRONT PILLAR GARNISH LH
32. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure described for the LH side.
33. REMOVE FRONT PILLAR GARNISH RH
34. REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
(a) Apply protective tape as shown in the illustration.
Text in Illustration
*1
Protective Tape
(b) Using a moulding remover B, detach the 2 claws, 3 clips and remove the instrument panel speaker panel
sub-assembly.
35. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY LH
36. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
HINT:
Use the same procedure described for the instrument panel speaker panel sub-assembly.
37. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY RH
38. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
(a) Operate the tilt lever to fully extend and lower the steering column.
(b) Disconnect each connector and each wire harness clamp.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
Text in Illustration
*A
w/ Automatic Light Control System
*B
w/ Front Center Speaker
(c) Apply protective tape as shown in the illustration.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
Text in Illustration
*1
Protective Tape
*2
Bolt <G>
*3
Bolt <B>
*4
Nut <C>
(d) Remove the 2 bolts <G>.
(e) Remove the 3 bolts <B> and 2 nuts <C>.
(f) Detach the 5 claws and remove the instrument panel sub-assembly.
39. REMOVE NO. 3 INSTRUMENT PANEL STAY
(a) Detach the 3 claws and remove the 3 No. 3 instrument panel stays.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
40. REMOVE NO. 1 INSTRUMENT PANEL CLIP
(a) Detach the 2 claws and remove the 2 No. 1 instrument panel clips.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст