Toyota Tundra (2015 year). Manual — part 738
(a) Place SST on the No. 2 brake flange, and compress the return spring.
SST: 09380-60010
09381-06010
09381-06020
09381-06050
09381-06070
09381-06090
09381-06120
(b) Using a screwdriver, remove the snap ring from the transmission case.
(c) Remove the 2 flanges, 4 discs, 3 plates and brake piston return
spring from the transmission case.
80. INSPECT NO. 2 BRAKE DISC
81. INSPECT NO. 2 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
82. REMOVE CENTER PLANETARY GEAR ASSEMBLY
(a) Remove the center planetary gear and planetary sun gear from
the transmission case.
83. INSPECT CENTER PLANETARY GEAR ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
84. REMOVE NO. 2 BRAKE CYLINDER WITH NO. 2 BRAKE
PISTON
(a) Remove the No. 2 brake cylinder with the No. 2 brake piston
from the transmission case.
85. REMOVE NO. 2 BRAKE PISTON
(a) Hold the No. 2 brake piston and apply compressed air to the No. 2 brake cylinder to remove the No. 2
brake piston.
HINT:
If the piston does not pop out with compressed air, lift the piston out with needle-nose pliers.
(b) Remove the 2 O-rings from the No. 2 brake piston.
86. REMOVE INTERMEDIATE SHAFT WITH NO. 3 1-WAY CLUTCH ASSEMBLY, REAR
PLANETARY RING GEAR FLANGE AND REAR PLANETARY RING GEAR
(a) Using SST, remove the snap ring from the transmission case.
SST: 09350-30020
09350-07060
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(b) Remove the intermediate shaft with No. 3 1-way clutch, rear
planetary ring gear flange and rear planetary ring gear from the
transmission case.
87. INSPECT NO. 3 1-WAY CLUTCH ASSEMBLY
88. REMOVE NO. 3 1-WAY CLUTCH ASSEMBLY
(a) Remove the No. 3 1-way clutch and 1-way clutch inner race
from the intermediate shaft.
89. REMOVE REAR PLANETARY RING GEAR
(a) Remove the rear planetary ring gear with rear planetary ring gear flange, 3 thrust bearing races and
thrust needle roller bearing from the intermediate shaft.
(b) Using a screwdriver, remove the snap ring.
(c) Remove the rear planetary ring gear flange from the rear planetary ring gear.
90. INSPECT INTERMEDIATE SHAFT
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
91. REMOVE NO. 4 BRAKE DISC SET
(a) Remove the 2 flanges, 7 discs and 6 plates from the
transmission case.
92. INSPECT NO. 4 BRAKE DISC
93. REMOVE BRAKE PLATE STOPPER SPRING
NOTICE:
When removing the stopper spring, do not apply excessive force
and do not deform it.
94. REMOVE REAR PLANETARY GEAR ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст