Toyota Tundra (2015 year). Manual — part 736
(d) Remove the reverse clutch return spring and O-ring from the
reverse clutch piston sub-assembly.
55. INSPECT REVERSE CLUTCH RETURN SPRING SUB-ASSEMBLY
56. REMOVE REVERSE CLUTCH PISTON SUB-ASSEMBLY
(a) Remove the reverse clutch piston from the clutch drum.
(b) Remove the O-ring from the reverse clutch piston.
(c) Remove the O-ring from the clutch drum.
57. REMOVE DIRECT CLUTCH PISTON SUB-ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Place SST on the direct clutch piston, and compress the return spring with a press.
SST: 09380-60010
09381-06030
09381-06040
09381-06080
(b) Using SST, remove the snap ring.
SST: 09350-30020
09350-07070
(c) Place the oil pump onto the torque converter clutch, and then place the clutch drum onto the oil pump.
(d) Hold the direct clutch piston by hand and apply compressed air
and direct clutch return spring sub-assembly.
(e) Remove the No. 2 clutch balancer and direct clutch return spring
sub-assembly from the direct clutch piston.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(f) Remove the 2 O-rings from the direct clutch piston.
58. INSPECT DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY
59. REMOVE NO. 3 BRAKE SNAP RING
(a) Using a screwdriver, remove the No. 3 brake snap ring from the
transmission case.
60. REMOVE NO. 3 BRAKE DISC SET
(a) Remove the 2 flanges, 4 discs and 3 plates from the
transmission case.
61. INSPECT NO. 3 BRAKE DISC
62. REMOVE NO. 3 BRAKE PISTON HOLE SNAP RING
(a) Using SST, remove the snap ring.
SST: 09350-30020
09350-07060
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
63. REMOVE NO. 3 BRAKE CYLINDER WITH NO. 3 BRAKE
PISTON AND NO. 3 BRAKE PISTON RETURN SPRING
SUB-ASSEMBLY
(a) Remove the No. 3 brake cylinder with the No. 3 brake piston
and No. 3 brake piston return spring from the transmission case.
64. REMOVE NO. 3 BRAKE PISTON
(a) Using SST and a press, compress the return spring and remove the snap ring and No. 3 brake piston
return spring with a screwdriver.
SST: 09380-60010
09381-06020
09381-06040
09381-06060
09381-06100
09381-06110
(b) Hold the No. 3 brake piston and apply compressed air (392 kPa,
4.0 kgf/cm 2 , 57 psi) to the No. 3 brake cylinder to remove the
No. 3 brake piston.
(c) Remove the 2 O-rings from the No. 3 brake piston.
65. INSPECT NO. 3 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст