Toyota Tundra (2015 year). Manual — part 2137
2. INSTALL SLIDING ROOF WEATHERSTRIP
(2) Make sure the weatherstrip's cutout is toward the rear side
the illustration.
3. INSTALL SLIDING ROOF GLASS SUB-ASSEMBLY
(a) Using a T25 "TORX" driver, temporarily install the glass with the
4 screws.
(b) Perform a level check.
SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): INST...
Standard:
AREA
MEASUREMENT
A - A
0 +/-1.5 mm (0 +/-0.0591 in.)
B - B
C - C
D - D
HINT:
"+" represents the condition that the glass is above the panel level. "-" represents the condition that the
glass is below the panel level.
(2) Perform a gap check.
The gap must be even all around.
(c) Tighten the 4 screws.
Torque:
4.0 N·m {41 kgf·cm, 35in·lbf}
4. CHECK FOR WATER LEAK
SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): INST...
5. INSTALL SLIDING ROOF SIDE GARNISH LH
HINT:
Use the same procedures described for the LH side.
7. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH
(a) Install the curtain shield airbag
.
8. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
9. INSTALL ROOF HEADLINING ASSEMBLY
.
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light
.
SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): INST...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM0000033MU00JX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SLIDING ROOF: SLIDING ROOF SWITCH ASSEMBLY (for CrewMax): COMPONENTS; 2015 MY Tundra
[08/2014 - ]
COMPONENTS
ILLUSTRATION
SLIDING ROOF: SLIDING ROOF SWITCH ASSEMBLY (for CrewMa...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст