Toyota Tundra (2015 year). Manual — part 2136
(b) Using a screwdriver, slide the drive cable in the direction
indicated by the arrow in the illustration to install it.
HINT:
Tape the screwdriver tip before use.
SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): REAS...
(e) Attach the 2 claws to install the drip channel.
4. ADJUST SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY
(a) Using a screwdriver, align the matchmarks by sliding the drive
cable in the directions indicated by the arrow in the illustration.
HINT:
Tape the screwdriver tip before use.
5. INSTALL SUNSHADE TRIM SUB-ASSEMBLY
(c) Install the 2 screws.
SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): REAS...
6. INSTALL SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY
(a) Install the drive gear and room light bracket with the 2 bolts.
Torque:
5.4 N·m {5.5 kgf·cm, 48in·lbf}
SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): REAS...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002LP903EX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): INSTALLATION; 2015 MY Tundra [08/2014 -
]
INSTALLATION
1. INSTALL SLIDING ROOF HOUSING SUB-ASSEMBLY
(a) Temporarily install the housing with the 10 bolts (vehicle body side) and 6 nuts.
(b) Tighten the 6 nuts.
Torque:
5.5 N·m {56 kgf·cm, 49in·lbf}
(c) Tighten the 10 bolts.
Torque:
5.5 N·m {56 kgf·cm, 49in·lbf}
SLIDING ROOF: SLIDING ROOF HOUSING (for CrewMax): INST...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст