Toyota Tundra (2015 year). Manual — part 381
(a) Using a vernier caliper, measure distance A (from the top
NOTICE:
The 1st and reverse brake piston must be installed securely to
Distance A = 36.35 to 37.09 mm (1.43 to 1.46 in.)
(b) Assemble the No. 4 brake flange, 8 No. 4 brake discs and 7 No.
4 brake plates, and using a vernier caliper, measure distance B
in the illustration at both ends across the diameter, and calculate
the average.
HINT:
Distance B = 33.94 to 35.04 mm (1.34 to 1.38 in.)
Thickness H:
NO.
THICKNESS
0
0 mm (0 in.)
2
0.15 to 0.25 mm (0.00590 to 0.00984 in.)
4
0.35 to 0.45 mm (0.0138 to 0.0177 in.)
6
0.55 to 0.65 mm (0.0217 to 0.0256 in.)
8
0.75 to 0.85 mm (0.0295 to 0.0335 in.)
10
0.95 to 1.05 mm (0.0374 to 0.0413 in.)
12
1.15 to 1.25 mm (0.0453 to 0.0492 in.)
14
1.35 to 1.45 mm (0.0531 to 0.0571 in.)
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
8. INSTALL NO. 4 BRAKE DISC
(a) Install the flange, 8 discs, 7 plates and selected flange.
Install in order:
F - D - P - D - P - D - P - D - P - D - P - D - P - D - P - D - F
HINT:
F = Flange
D = Disc
P = Plate
9. INSTALL BRAKE PLATE STOPPER SPRING
10. INSTALL REAR PLANETARY RING GEAR FLANGE SUB-ASSEMBLY
(a) Install the rear planetary ring gear flange to the rear planetary ring gear.
(b) Using a screwdriver, install the snap ring.
(c) Install the thrust bearing race, thrust needle roller bearing,
thrust bearing race and planetary ring gear flange together with
the rear planetary ring gear to the intermediate shaft.
Bearing and Race Diameter:
ITEM
INSIDE
OUTSIDE
Race H
33.18 to 33.53 mm (1.31 to
48.8 to 49.0 mm (1.89 to
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
ITEM
INSIDE
OUTSIDE
(Fr)
1.32 in.)
1.93 in.)
Bearing H
32.15 to 32.31 mm (1.26 to
1.27 in.)
48.97 to 49.77 mm (1.93 to
1.96 in.)
Race H
(Rr)
32.15 to 32.4 mm (1.27 to
1.28 in.)
48.7 to 49.0 mm (1.92 to
1.93 in.)
11. INSTALL NO. 3 1-WAY CLUTCH ASSEMBLY
(a) Install the 1-way clutch and 1-way clutch inner race to the
intermediate shaft.
12. INSTALL INTERMEDIATE SHAFT
(a) Install the intermediate shaft with No. 3 1-way clutch assembly to the case.
(b) Using SST, install the snap ring.
SST: 09350-30020
09350-07060
13. INSTALL CENTER PLANETARY GEAR ASSEMBLY
(a) Install the planetary sun gear and center planetary gear to the
case.
(b) Coat the thrust bearing race with petroleum jelly, and install it
to the center planetary gear.
Race Diameter:
ITEM
INSIDE
OUTSIDE
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
ITEM
INSIDE
OUTSIDE
Race
G
53.75 to 54.0 mm (2.12 to
2.13 in.)
73.7 to 74.0 mm (2.90 to
2.91 in.)
14. INSTALL NO. 2 BRAKE PISTON
(a) Coat 2 new O-rings with ATF, and install them to the brake piston.
(b) Press the brake piston into the brake cylinder with both hands.
NOTICE:
Be careful not to damage the O-rings.
(c) Install the No. 2 brake cylinder with No. 2 brake piston to the case.
HINT:
15. SELECT NO. 2 BRAKE FLANGE
(a) Install the No. 2 brake piston return spring and flange to the No. 2 brake piston.
(b) Place SST on the brake flange and compress the brake return
spring.
SST: 09351-40010
09351-04010
09351-04020
09351-04040
09351-04050
(c) Using a screwdriver, install the snap ring to the transmission case.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст