Toyota Tundra (2015 year). Manual — part 382
illustration.
HINT:
Standard distance A: 20.94 to 22.12 mm (0.824 to 0.871 in.)
(e) Remove the snap ring, flange and No. 2 brake piston return spring.
(f) Assemble the flange, 4 discs, 3 plates and flange (thickness:
1.95 to 2.05 mm (0.0768 to 0.0807 in.)) as shown in the
illustration, and using a vernier caliper, measure distance B in
the illustration at both ends across the diameter, and calculate
the average.
HINT:
Standard distance B: 18.52 to 19.15 mm (0.729 to 0.754 in.)
Flange Thickness:
NO.
THICKNESS
0
0 1.95 to 2.05 mm (0.0768 to 0.0807 in.)
1
2.05 to 2.15 mm (0.0807 to 0.0846 in.)
2
2.15 to 2.25 mm (0.0846 to 0.0886 in.)
3
2.25 to 2.35 mm (0.0886 to 0.0925 in.)
4
2.35 to 2.45 mm (0.0925 to 0.0965 in.)
5
2.45 to 2.55 mm (0.0965 to 0.100 in.)
6
2.55 to 2.65 mm (0.100 to 0.104 in.)
7
2.65 to 2.75 mm (0.104 to 0.108 in.)
16. INSTALL NO. 2 BRAKE DISC SET
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Install the brake piston return spring.
(b) Install the 2 flanges, 4 discs, 3 plates.
Install in order:
F - D - P - D - P - D - P - D - F
HINT:
D = Disc
P = Plate
F = Flange
(c) Using SST and a press, compress the return spring and install
the snap ring.
SST: 09351-40010
09351-04010
09351-04030
09351-04040
09351-04050
17. INSTALL NO. 1 BRAKE PISTON
(a) Coat 2 new O-rings with ATF, and install them to the brake
piston.
(b) Press the brake piston into the brake cylinder with both hands to
install it.
NOTICE:
Be careful not to damage the O-rings.
18. INSTALL NO. 1 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Install the No. 1 brake cylinder with No. 1 brake piston and the brake piston return spring to the
transmission case.
transmission case.
19. INSTALL NO. 1 BRAKE PISTON RETURN SPRING SNAP
RING
(a) Using SST, compress the return spring and install the No. 1
brake piston return spring snap ring.
SST: 09351-40010
09351-04010
09351-04030
09351-04040
09351-04050
20. SELECT NO. 1 BRAKE FLANGE
(a) Using a vernier caliper, measure distance A (from the step in the
HINT:
Standard distance A: 19.74 to 20.22 mm (0.777 to 0.796 in.)
(b) Assemble the 4 plates, 4 discs and flange (thickness: 2.15 to
2.25 mm (0.0846 to 0.0886 in.)) as shown in the illustration,
and using a vernier caliper, measure distance B in the illustration
at both ends across the diameter, and calculate the average.
HINT:
Standard distance B: 18.93 to 19.39 mm (0.745 to 0.763 in.)
0.0339 in.).
Flange Thickness:
NO.
THICKNESS
0
1.95 to 2.05 mm (0.0768 to 0.0807 in.)
1
2.15 to 2.25 mm (0.0846 to 0.0886 in.)
2
2.35 to 2.45 mm (0.0925 to 0.0965 in.)
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
NO.
THICKNESS
3
2.55 to 2.65 mm (0.100 to 0.104 in.)
21. INSTALL NO. 1 BRAKE DISC
(a) Install the 4 plates, 4 discs and flange.
Install in order:
P - D - P - D - P - D - P - D - F
HINT:
P = Plate
D = Disc
F = Flange
22. INSTALL CENTER PLANETARY RING GEAR
(a) Install the center planetary ring gear and front planetary ring gear flange to the front planetary ring gear.
(b) Using a screwdriver, install the snap ring.
23. INSTALL FRONT PLANETARY RING GEAR
(a) Install the thrust needle roller bearing and front planetary ring
gear to the case.
Thrust Needle Roller Bearing Diameter:
ITEM
INSIDE
OUTSIDE
Bearing
G
55.76 to 55.79 mm (2.19 to
2.20 in.)
76.1 to 76.35 mm (3.00 to
3.01 in.)
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст