Toyota Tundra (2015 year). Manual — part 307
14. INSTALL NO. 2 CABLE RETAINER
(a) Install the retainer with the bolt.
Torque:
13 N·m {127 kgf·cm, 9ft·lbf}
15. INSTALL INTERMEDIATE LEVER TENSION SPRING
(a) Install the tension spring.
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION; 20...
16. INSTALL PARKING BRAKE SHOE LEVER RH
HINT:
Use the same procedures described for the LH side.
17. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
18. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
19. INSTALL PARKING BRAKE SHOE RETURN SPRING RH
HINT:
Use the same procedures described for the LH side.
20. CHECK PARKING BRAKE INSTALLATION
21. INSTALL REAR DISC RH
HINT:
Use the same procedures described for the LH side.
22. ADJUST PARKING BRAKE SHOE CLEARANCE
23. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
24. INSTALL REAR WHEEL RH
25. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for 3700 mm [12 ft. 1.7 in.]
Wheelbase Type)
(a) Install the No. 1 cable support bracket with the 3 bolts (labeled A).
Torque:
19 N·m {194 kgf·cm, 14ft·lbf}
5.4 N·m {55 kgf·cm, 48in·lbf}
(c) Connect the 2 clamps (labeled C) to the No. 1 parking brake cable.
(d) Install the 2 clamps with the 2 nuts (labeled D).
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
(e) Install the No. 1 parking brake cable and cable retainer with the bolt (labeled E).
Torque:
13 N·m {127 kgf·cm, 9ft·lbf}
(f) Temporarily install the adjustment nut and lock nut (labeled F).
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION; 20...
NOTICE:
Do not bend and twist the parking brake cable.
HINT:
The nuts will be tightened to a torque specification in the "ADJUST PARKING BRAKE PEDAL TRAVEL"
procedure.
26. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for 4180 mm [13 ft. 8.6 in.]
Wheelbase Type)
(a) Install the No. 1 cable support bracket with the 3 bolts (labeled A).
Torque:
19 N·m {194 kgf·cm, 14ft·lbf}
5.4 N·m {55 kgf·cm, 48in·lbf}
(c) Connect the 3 clamps (labeled C) to the No. 1 parking brake cable.
(d) Install the 3 clamps with the 3 nuts (labeled D).
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
(e) Install the No. 1 parking brake cable and cable retainer with the bolt (labeled E).
Torque:
13 N·m {127 kgf·cm, 9ft·lbf}
(f) Temporarily install the adjustment nut and lock nut (labeled F).
NOTICE:
Do not bend and twist the parking brake cable.
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION; 20...
HINT:
The nuts will be tightened to a torque specification in the "ADJUST PARKING BRAKE PEDAL TRAVEL"
procedure.
27. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY
(a) for 1UR-FE:
Install the front No. 2 exhaust pipe
.
(b) for 3UR-FE:
Install the front No. 2 exhaust pipe
.
(c) for 3UR-FBE:
Install the front No. 2 exhaust pipe
.
28. CONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY
29. SETTLE PARKING BRAKE SHOE AND DISC
30. CHECK PARKING BRAKE PEDAL TRAVEL
31. ADJUST PARKING BRAKE PEDAL TRAVEL
32. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
33. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
34. INSTALL INSTRUMENT SIDE PANEL LH
35. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
36. CHECK SRS WARNING LIGHT
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION; 20...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст