Toyota Tundra (2015 year). Manual — part 134
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000004RS601IX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: FREEZE FRAME DATA; 2015 MY Tundra
[08/2014 - ]
FREEZE FRAME DATA
1. FREEZE FRAME DATA
(a) Whenever a DTC is detected, the blind spot monitor sensor stores the current vehicle (sensor) state as
Freeze Frame Data.
2. CHECK FREEZE FRAME DATA
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the blind spot monitor main switch assembly (warning canceling switch assembly) on.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave /
Trouble Codes.
(f) According to the display on the Techstream, display the Freeze Frame Data for the selected DTC.
Blind Spot Monitor Master
TESTER
DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Main Switch
Blind spot monitor main
switch assembly (warning
canceling switch assembly) /
OFF or ON
ON: Blind spot monitor main
switch assembly (warning
canceling switch assembly) on
OFF: Blind spot monitor main
switch assembly (warning
canceling switch assembly) off
-
Warning
Indicator
Turning on
(Master)
/ OFF or ON
OFF: The following conditions are
not met
Not during
initial check
Vehicle detected
in warning area
Vehicle speed
16 km/h (10
mph) or more
Shift lever in
any position
except R
No DTC output
-
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
TESTER
DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Warning
Indicator
Flashing
(Master)
OFF or ON
OFF: The following conditions are
not met
Not during
initial check
Vehicle detected
in warning area
Vehicle speed
16 km/h (10
mph) or more
Shift lever in
any position
except R
No DTC output
-
Main Switch
Indicator
Status
monitor main switch assembly
(warning canceling switch
assembly) / OFF or ON
OFF: Indicator not illuminated
ON: Indicator illuminated
-
Warning
Indicator Input
Circuit Voltage
The outer rear view mirror
indicator voltage / Min.: 0 V,
Max.: 25.5 V
Not illuminated: 0 V
Illuminated: 2.5 to 7.5 V
-
Warning
Indicator Input
Circuit Current
The outer rear view mirror
indicator current / Min.: 0 mA,
Max.: 255 mA
Not illuminated: 0 mA
Illuminated: 5 to 100 mA
-
Right Turn SW
State (CAN)
signal light switch) / ON or
OFF
-
Left Turn SW
State (CAN)
signal light switch) / ON or
OFF
-
Reverse
ON: Shift lever in R
OFF: Shift lever in any position
except R
-
Vehicle Speed
Vehicle speed signal / Min.: 0
km/h (0 mph), Max.: 326
km/h (203 mph)
Vehicle stopped: 0 km/h (0 mph)
-
Steering Angle
Steering sensor / Min.:
-3072°, Max.: 3070.5°
Left turn: Increases
Right turn: Decreases
-
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
TESTER
DISPLAY
MEASUREMENT ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Power Supply
Voltage
Power supply voltage / Min.: 0
V, Max.: 50 V
Always: 11 to 14 V
-
Indicator Light
Control State
Outer rear view mirror
indicator dimming state / Dim
OFF or Dim ON
Dim OFF: Indicator not dimmed
Dim ON: Indicator dimmed
-
Angle
Adjustment by
Auto
Alignment
Angle adjusted using auto
alignment / Min.: Under -12.8
deg, Max.: Over 12.7 deg
Angle adjusted using auto
alignment is displayed
When the adjusted angle is
12.7 degrees or more, "Over
12.7" is displayed and when
it is -12.8 degrees or less,
"Under -12.8" is displayed
Number of
DTC
When system is normal: 0
When a malfunction is detected:
More than 0
-
Blind Spot Monitor Slave
TESTER
DISPLAY
MEASUREMENT
ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
Warning
Indicator
Turning on
(Slave)
turning on / OFF or ON
OFF: The following conditions are
not met
Not during initial
check
Vehicle detected in
warning area
Vehicle speed 16
km/h (10 mph) or
more
Shift lever in any
position except R
No DTC output
-
Warning
Indicator
Flashing
(Slave)
flashing / OFF or ON
OFF: The following conditions are
not met
Not during initial
check
Vehicle detected in
warning area
Vehicle speed 16
km/h (10 mph) or
more
Shift lever in any
-
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
TESTER
DISPLAY
MEASUREMENT
ITEM/RANGE
NORMAL CONDITION
DIAGNOSTIC NOTE
position except R
No DTC output
Buzzer Sound
Status
spot monitor buzzer) /
OFF or ON
OFF: Buzzer not sounding
Not during initial
check
Vehicle detected in
warning area of
rear cross traffic
alert
Speed difference
between driver's
vehicle and target
vehicle is 1.5 m/s
or more
Shift lever in R
No DTC output
-
Warning
Indicator Input
Circuit Voltage
The outer rear view
mirror indicator voltage /
Min.: 0 V, Max.: 25.5 V
Not illuminated: 0 V
Illuminated: 2.5 to 7.5 V
-
Warning
Indicator Input
Circuit Current
The outer rear view
mirror indicator current /
Min.: 0 mA, Max.: 255
mA
Not illuminated: 0 mA
Illuminated: 5 to 100 mA
-
Buzzer Input
Circuit Voltage
Rear cross traffic alert
buzzer (blind spot
monitor buzzer) voltage /
Min.: 0 V, Max.: 25.5 V
Not sounding buzzer: 11 to 14 V
Sounding buzzer: Alternating
between 0 to 14 V
-
Right Turn SW
State (CAN)
(right signal light switch)
/ ON or OFF
-
Left Turn SW
State (CAN)
(left turn signal light
switch) / ON or OFF
-
Reverse
ON: Shift lever in R
OFF: Shift lever in any position
except R
-
Vehicle Speed
Vehicle speed signal /
Min.: 0 km/h (0 mph),
Max.: 326 km/h (203
mph)
Vehicle stopped: 0 km/h (0 mph)
-
PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM:...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст