Toyota Tundra (2015 year). Manual — part 2951
(a) Remove the front seat outer belt.
(1) Wind the seat belt with the retractor.
(2) When the seat belt is sufficiently wound, cut the seat belt
approximately 100 mm (3.94 in.) from the retractor, as
shown in the illustration.
HINT:
The seat belt is designed so that winding the seat belt before
SST: 09082-00700
SST: 09082-00770
CAUTION:
When activating a seat belt pretensioner, always use the
specified SST.
NOTICE:
a tire (with wheel).
NOTICE:
Set up the front seat outer belt as shown in the illustration.
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for CrewMax):...
(3) Move SST at least 10 m (32.8 ft.) away from the wheel.
NOTICE:
Take care not to damage SST wire harness.
(d) Activate the seat belt pretensioner.
(1) Connect SST's red clip to the battery's positive (+) terminal and the black clip to the battery's negative
(-) terminal.
HINT:
The seat belt pretensioner operates at the same time SST activation switch's LED illuminates.
Do not touch the front seat outer belt for at least 30 minutes after the seat belt pretensioner has been
activated. It is very hot.
Use gloves and safety glasses when handling a front seat outer belt whose pretensioner has been activated.
Always wash your hands with water after completing the disposal.
Do not apply water to a front seat outer belt that has an activated pretensioner.
(1) Remove the tire (with wheel) and SST.
(2) Place the front seat outer belt in a plastic bag, tie the end
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for CrewMax):...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002ZXI00UX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for Double Cab): COMPONENTS; 2015 MY Tundra
[08/2014 - ]
COMPONENTS
ILLUSTRATION
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for Double Cab...
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY (for Double Cab...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст