Toyota Tundra (2015 year). Manual — part 2114
Last Modified: 9-16-2014
6.6 G
Doc ID: RM000001DHF06TX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: MIRROR: OUTER MIRROR SWITCH: INSPECTION; 2015 MY Tundra [08/2014 - ]
INSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)
(a) Check the resistance.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
4 (VL) - 8 (B)
6 (M+) - 7 (E)
UP
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
4 (VL) - 7 (E)
6 (M+) - 8 (B)
DOWN
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
5 (HL) - 8 (B)
6 (M+) - 7 (E)
LEFT
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
5 (HL) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
Text in Illustration
*a
Component without harness connected
(Outer Mirror Switch Assembly)
If the result is not as specified, replace the outer mirror
switch assembly.
(3) Select "R" on the left/right adjustment switch.
(4) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
3 (VR) - 8 (B)
6 (M+) - 7 (E)
UP
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
3 (VR) - 7 (E)
6 (M+) - 8 (B)
DOWN
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
2 (HR) - 8 (B)
LEFT
Pressed
Below 1 Ω
MIRROR: OUTER MIRROR SWITCH: INSPECTION; 2015 MY Tundr...
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
6 (M+) - 7 (E)
Not pressed 10 kΩ or higher
2 (HR) - 7 (E)
6 (M+) - 8 (B)
RIGHT
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
If the result is not as specified, replace the outer mirror
switch assembly.
2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror, w/ Memory)
(a) Inspect the outer mirror switch assembly.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
3 (M+) - 2 (E1)
UP
Pressed
100 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
DOWN
Pressed
470 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
LEFT
Pressed
800 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
RIGHT
Pressed
250 Ω
Not pressed 10 kΩ or higher
1 (MSW) - 2 (E1)
L switch
Pressed
100 Ω
Not pressed 10 kΩ or higher
Text in Illustration
*a
Component without harness connected
(Outer Mirror Switch Assembly)
If the result is not as specified, replace the outer mirror
switch assembly.
(3) Select "R" on the left/right adjustment switch.
(4) Using an ohmmeter, measure the resistance and check the
results in accordance with the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
3 (M+) - 2 (E1)
UP
Pressed
100 Ω
MIRROR: OUTER MIRROR SWITCH: INSPECTION; 2015 MY Tundr...
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
DOWN
Pressed
470 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
LEFT
Pressed
800 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
RIGHT
Pressed
250 Ω
Not pressed 10 kΩ or higher
1 (MSW) - 2 (E1)
R switch
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
If the result is not as specified, replace the outer mirror
switch assembly.
3. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)
(a) Inspect the outer mirror switch assembly.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table
below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
3 (M+) - 2 (E1)
UP
Pressed
100 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
DOWN
Pressed
470 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
LEFT
Pressed
800 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
RIGHT
Pressed
250 Ω
Not pressed 10 kΩ or higher
1 (MSW) - 2 (E1)
L switch
Pressed
100 Ω
Not pressed 10 kΩ or higher
Text in Illustration
*a
Component without harness connected
(Outer Mirror Switch Assembly)
If the result is not as specified, replace the outer mirror
switch assembly.
MIRROR: OUTER MIRROR SWITCH: INSPECTION; 2015 MY Tundr...
(3) Select "R" on the left/right adjustment switch.
(4) Using an ohmmeter, measure the resistance and check the
results in accordance with the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
3 (M+) - 2 (E1)
UP
Pressed
100 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
DOWN
Pressed
470 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
LEFT
Pressed
800 Ω
Not pressed 10 kΩ or higher
3 (M+) - 2 (E1)
RIGHT
Pressed
250 Ω
Not pressed 10 kΩ or higher
1 (MSW) - 2 (E1)
R switch
Pressed
Below 1 Ω
Not pressed 10 kΩ or higher
If the result is not as specified, replace the outer mirror
switch assembly.
(b) Inspect the retract switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
TESTER CONNECTION
CONDITION
SPECIFIED CONDITION
6 (B) - 7 (MR)
8 (MF) - 4 (E2)
Pressed
(Retracts)
Below 1 Ω
Not pressed
10 kΩ or higher
6 (B) - 8 (MF)
4 (E2) - 7 (MR)
Pressed
(Driving position)
Below 1 Ω
Not pressed
10 kΩ or higher
If the result is not as specified, replace the outer mirror switch assembly.
MIRROR: OUTER MIRROR SWITCH: INSPECTION; 2015 MY Tundr...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст