Toyota Tundra (2015 year). Manual — part 744
illustration. *1
HINT:
Standard distance A: 21.00 to 21.76 mm (0.834 to 0.857 in.)
(e) Assemble the 4 discs, 3 plates and flange as shown in the
HINT:
Standard distance B: 16.54 to 17.15 mm (0.651 to 0.675 in.)
(f) Apply the A and B measurements taken in *1 and *2 to the graph below. Use A for the X axis and B for the
Y axis, and then choose the flange indicated by the graph point.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
HINT:
Make sure that when the B measurement and selected flange's thickness are subtracted from the A
measurement, the value is 2.20 to 2.50 mm (0.0866 to 0.0984 in.).
Flange thickness:
MARK
THICKNESS
0
1.95 to 2.05 mm (0.0768 to 0.0807 in.)
1
2.05 to 2.15 mm (0.0807 to 0.0846 in.)
2
2.15 to 2.25 mm (0.0846 to 0.0886 in.)
3
2.25 to 2.35 mm (0.0886 to 0.0925 in.)
4
2.35 to 2.45 mm (0.0925 to 0.0965 in.)
5
2.45 to 2.55 mm (0.0965 to 0.100 in.)
6
2.55 to 2.65 mm (0.100 to 0.104 in.)
7
2.65 to 2.75 mm (0.104 to 0.108 in.)
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(g) Remove the snap ring, flange and No. 2 brake piston return spring from the transmission case.
16. INSTALL NO. 2 BRAKE DISC SET
(a) Install the brake piston return spring, selective flange, 4 discs, 3 plates, and flange.
Install in order:
S/F - D - P - D - P - D - P - D - F
HINT:
S/F = Selective flange
D = Disc
P = Plate
F = Flange
NOTICE:
Before assembling new discs, soak them in ATF for at least 2 hours.
(b) Place SST on the brake flange and compress the brake return
spring.
SST: 09380-60010
09381-06010
09381-06020
09381-06050
09381-06070
09381-06090
09381-06120
(c) Using a screwdriver, install the snap ring to the transmission case.
17. INSTALL CENTER PLANETARY GEAR ASSEMBLY
(a) Install the center planetary sun gear and center planetary gear
to the transmission case.
NOTICE:
Make sure to install the center planetary sun gear with the
groove facing the transmission case.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
18. INSTALL NO. 1 BRAKE PISTON
(a) Coat 2 new O-rings with ATF, and install them on the brake
piston.
(b) Press the brake piston into the brake cylinder with both hands.
NOTICE:
Be careful not to damage the O-rings.
19. INSTALL NO. 1 BRAKE CYLINDER WITH NO. 1 BRAKE PISTON
(a) Install the No. 1 brake cylinder with piston and brake piston return spring to the transmission case.
NOTICE:
When installing the No. 1 brake cylinder with piston to the transmission case, align and install the
cylinder's claw to the case's top groove.
Make sure the No. 1 brake cylinder with piston is securely inserted into the transmission case.
(b) Place SST on the brake return spring and compress the brake
return spring.
SST: 09380-60010
09381-06010
09381-06020
09381-06050
09381-06060
09381-06090
09381-06100
09381-06110
09381-06120
(c) Using a screwdriver, install the snap ring to the transmission case.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст