Toyota Tundra (2015 year). Manual — part 742
(b) Install the 1st and reverse brake piston to the transmission
case.
NOTICE:
SUB-ASSEMBLY
(a) Place the brake return spring onto the 1st and reverse brake
piston.
SST: 09380-60010
09381-06030
09381-06040
09381-06080
09381-06120
09381-06130
09381-05040
09381-05050
(b) Place SST on the spring retainer, and compress the return
spring.
(c) Using SST, install the snap ring.
SST: 09350-30020
09350-07070
4. SELECT NO. 4 BRAKE FLANGE
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
HINT:
Standard distance A: 27.82 to 28.42 mm (1.09 to 1.12 in.)
(b) Assemble the No. 4 brake flange, 7 No. 4 brake discs and 6 No.
4 brake plates, and measure distance B in the illustration. *2
HINT:
Standard distance B: 25.98 to 27.01 mm (1.02 to 1.06 in.)
the Y axis, and then choose the flange indicated by the graph point.
HINT:
Make sure that when the B measurement and selected flange's H dimension are subtracted from the A
measurement, the value is 0.961 to 1.261 mm (0.0378 to 0.0495 in.).
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
No. 4 brake selective flange length H:
MARK
THICKNESS
0
0 mm (0 in.)
2
0.15 to 0.25 mm (0.00590 to 0.00984 in.)
4
0.35 to 0.45 mm (0.0138 to 0.0177 in.)
6
0.55 to 0.65 mm (0.0217 to 0.0256 in.)
8
0.75 to 0.85 mm (0.0295 to 0.0335 in.)
10
0.95 to 1.05 mm (0.0374 to 0.0413 in.)
5. INSTALL REAR PLANETARY GEAR ASSEMBLY
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Install the thrust bearing race.
HINT:
ITEM
INSIDE
OUTSIDE
Race J
47.2 to 47.4 mm (1.86 to 1.87 in.)
67.1 to 67.4 mm (2.64 to 2.65 in.)
(b) Install the 2 thrust needle roller bearings to the rear planetary
gear.
Bearing diameter:
ITEM
INSIDE
OUTSIDE
Bearing
I
23.0 to 23.3 mm (0.906 to
0.917 in.)
44.0 to 44.2 mm (1.73 to
1.74 in.)
Bearing
J
43.6 to 43.9 mm (1.72 to
1.73 in.)
63.0 to 63.2 mm (2.48 to
2.49 in.)
HINT:
(c) Install the rear planetary gear assembly.
AB60F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст