Toyota Tundra (2015 year). Manual — part 1407
NOTICE:
Before installing the O-ring, remove any dirt or foreign matter
Torque:
13 N·m {127 kgf·cm, 9ft·lbf}
NOTICE:
Be careful that the O-ring does not get caught between any surrounding parts.
5. ADD ENGINE OIL
(a) Add fresh oil.
Standard Oil Grade (for U.S.A. and Canada):
OIL GRADE
OIL VISCOSITY (SAE)
ILSAC GF-5 multigrade engine oil
0W-20
Standard Oil Grade (for Mexico):
OIL GRADE
OIL VISCOSITY
(SAE)
API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving"
or ILSAC GF-5 multigrade engine oil
0W-20
5W-20
5W-30
10W-30
API grade SL, SM or SN multigrade engine oil
15W-40
20W-50
Standard Oil Capacity:
ITEM
SPECIFIED CONDITION
Drain and refill without oil filter change
7.1 liters (7.5 US qts, 6.2 Imp. qts)
Drain and refill with oil filter change
7.5 liters (7.9 US qts, 6.6 Imp. qts)
Dry fill
9.3 liters (9.8 US qts, 8.2 Imp. qts)
1UR-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT; ...
(b) Install the oil filler cap.
6. INSPECT FOR OIL LEAK
(a) Start the engine. Make sure that there are no oil leaks from the area that was worked on.
7. CHECK ENGINE OIL LEVEL
8. INSTALL NO. 1 ENGINE UNDER COVER
(a) Hook the engine under cover to the vehicle body as shown in
the illustration.
(b) Install the 3 screws and 5 bolts.
Torque:
for bolt -
29 N·m {296 kgf·cm, 21ft·lbf}
for screw -
3.0 N·m {31 kgf·cm, 27in·lbf}
1UR-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT; ...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002RTG02PX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE LUBRICATION: OIL PRESSURE SWITCH: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
1UR-FE LUBRICATION: OIL PRESSURE SWITCH: COMPONENTS...
Last Modified: 9-16-2014
6.6 G
Doc ID: RM00000315T018X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE LUBRICATION: OIL PRESSURE SWITCH: ON-VEHICLE INSPECTION; 2015 MY Tundra [08/2014 -
]
ON-VEHICLE INSPECTION
1. INSPECT OIL PRESSURE SENDER GAUGE ASSEMBLY
(a) Disconnect the sender gauge connector.
(b) Apply battery positive (+) voltage to the sender gauge terminal through a test LED.
(c) Check that the LED does not illuminate when the engine is stopped.
1UR-FE LUBRICATION: OIL PRESSURE SWITCH: ON-VEHICLE ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст