Toyota Tundra (2015 year). Manual — part 1362
14. REMOVE FRONT ENGINE MOUNTING INSULATOR LH
(a) Remove the nut and mounting insulator.
15. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET
RH
(a) Remove the 4 bolts and mounting bracket.
16. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET
LH
(a) Remove the 4 bolts and mounting bracket.
17. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH
18. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH
19. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY
20. REMOVE NO. 4 ENGINE COVER
21. REMOVE NO. 3 ENGINE COVER
22. REMOVE NO. 1 WATER BY-PASS HOSE
23. REMOVE AIR TUBE SUB-ASSEMBLY RH
24. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY
25. REMOVE WATER INLET HOUSING
26. REMOVE FRONT WATER BY-PASS JOINT
27. REMOVE WATER PUMP PULLEY
1UR-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL; 201...
28. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY
29. REMOVE FAN BRACKET SUB-ASSEMBLY
30. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
31. REMOVE SEPARATOR CASE
32. REMOVE NO. 2 ENGINE COVER
(a) Remove the No. 2 engine cover.
33. REMOVE NO. 1 ENGINE COVER
(a) Remove the No. 1 engine cover.
34. REMOVE ENGINE WIRE
(a) Disconnect the 4 knock sensor connectors.
(b) Disconnect the 3 clamps. Then remove the engine wire.
35. REMOVE NO. 11 WATER BY-PASS HOSE
(a) Remove the No. 11 water by-pass hose.
1UR-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL; 201...
36. REMOVE KNOCK SENSOR
37. REMOVE IGNITION COIL ASSEMBLY
(a) Remove the 8 bolts and 8 ignition coils.
38. REMOVE NOISE FILTER
(a) LH Side:
Remove the bolt and noise filter from the cylinder head cover.
(b) RH Side:
Remove the bolt and noise filter from the cylinder head cover.
1UR-FE ENGINE MECHANICAL: ENGINE UNIT: REMOVAL; 201...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM0000030XO028X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE OIL FILTER ELEMENT
2. REMOVE OIL FILTER BRACKET
3. REMOVE CRANKSHAFT PULLEY
4. REMOVE OIL FILLER CAP SUB-ASSEMBLY
5. REMOVE OIL FILLER CAP HOUSING
(a) Remove the 2 bolts, filler cap housing and gasket.
6. REMOVE SPARK PLUG
(a) Using a 16 mm plug wrench, remove the 8 spark plugs.
7. REMOVE VVT SENSOR
(a) LH:
Remove the 2 bolts and 2 VVT sensors.
(b) RH:
Remove the 2 bolts and 2 VVT sensors.
8. REMOVE CAMSHAFT POSITION SENSOR
1UR-FE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст