Toyota Tundra (2015 year). Manual — part 1324
(d) Tighten the 10 bolts in the order shown in the illustration.
Torque:
16 N·m {163 kgf·cm, 12ft·lbf}
NOTICE:
Thoroughly wipe clean any seal packing.
3. INSTALL NO. 3 CHAIN TENSIONER ASSEMBLY
(a) Install the chain tensioner with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
(b) While pushing down the No. 2 chain tensioner, insert a pin of
φ1.0 mm (0.0394 in.) into the hole to fix it in place.
4. INSTALL NO. 1 CHAIN SUB-ASSEMBLY LH
HINT:
Perform "Inspection After Repairs" after replacing the camshaft timing gear LH or camshaft timing exhaust
gear LH
.
(a) Align the No. 1 chain's orange mark plates with the camshaft
timing gear's timing mark, and attach the chain to the gear as
shown in the illustration.
(b) Align the No. 1 chain's orange mark plate with the crankshaft
timing gear's timing mark, and attach the chain to the gear as
shown in the illustration.
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 1): INST...
(c) Align the No. 2 chain's yellow mark plates with the timing marks
illustration.
HINT:
The crankshaft timing gear and camshaft exhaust gear will be
installed with the No. 1 and No. 2 chains connected to the gears.
(d) Install the crankshaft timing sprocket to the crankshaft.
(g) Remove the pin from the No. 2 chain tensioner.
5. INSTALL NO. 1 CHAIN TENSIONER SLIPPER LH
HINT:
If you cannot install the chain tensioner slipper due to the
(a) Move the stopper plate upward to release the lock, and push the plunger deep into the tensioner.
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 1): INST...
(c) Install a new gasket and the chain tensioner with the 2 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
7. INSTALL NO. 1 CHAIN VIBRATION DAMPER LH
(a) Install the vibration damper with the 2 bolts.
Torque:
21 N·m {214 kgf·cm, 15ft·lbf}
(b) Remove the hexagon wrench from the No. 1 chain tensioner.
8. TIGHTEN CAMSHAFT TIMING GEAR LH
Torque:
100 N·m {1020 kgf·cm, 74ft·lbf}
bolt.
Torque:
100 N·m {1020 kgf·cm, 74ft·lbf}
9. CHECK NO. 1 CYLINDER TO TDC / COMPRESSION
10. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY
(a) Install the timing chain cover
.
11. INSPECT IGNITION TIMING
12. INSPECT ENGINE IDLE SPEED
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 1): INST...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000003QCG00RX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): COMPONENTS; 2015 MY Tundra [08/2014 -
]
COMPONENTS
ILLUSTRATION
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): COM...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст