Toyota Tundra (2015 year). Manual — part 1325
ILLUSTRATION
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): COM...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002S5504FX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: 1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE TIMING CHAIN COVER SUB-ASSEMBLY
(a) Remove the timing chain cover
.
2. SET NO. 1 CYLINDER TO TDC / COMPRESSION
3. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY LH
4. REMOVE NO. 1 CHAIN TENSIONER SLIPPER LH
5. REMOVE NO. 1 CHAIN VIBRATION DAMPER LH
6. REMOVE NO. 1 CHAIN SUB-ASSEMBLY LH
7. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY RH
(a) Move the stopper plate upward to release the lock, and push the
plunger deep into the tensioner.
(b) Move the stopper plate downward to set the lock, and insert a
hexagon wrench into the stopper plate hole.
(c) Remove the 2 bolts and chain tensioner.
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): REM...
8. REMOVE NO. 1 CHAIN TENSIONER SLIPPER RH
9. REMOVE NO. 1 CHAIN VIBRATION DAMPER RH
(a) Remove the 2 bolts and vibration damper.
10. REMOVE NO. 1 CHAIN SUB-ASSEMBLY RH
NOTICE:
Be careful not to damage the cylinder head with the wrench.
Do not disassemble the camshaft timing gear.
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): REM...
NOTICE:
Be careful not to damage the cylinder head with the wrench.
(d) Remove the 2 bolts. Then with the No. 1 and No. 2 chains still connected to the gears, remove the
camshaft timing gear, camshaft timing exhaust gear and crankshaft timing sprocket RH.
(e) Remove the No. 1 and No. 2 chains from the gears.
11. REMOVE NO. 2 CHAIN TENSIONER ASSEMBLY
(a) Remove the 2 bolts and chain tensioner.
12. REMOVE CAMSHAFT BEARING CAP RH
sequence shown in the illustration.
1UR-FE ENGINE MECHANICAL: CAMSHAFT (for Bank 2): REM...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст