Toyota Tundra (2015 year). Manual — part 2408
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002YFL00KX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: LIGHTING: IGNITION KEY CYLINDER LIGHT: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
1. INSTALL TRANSPONDER KEY AMPLIFIER (IGNITION
KEY CYLINDER LIGHT)
(a) Connect the connector.
(b) Attach the 2 claws to install the transponder key amplifier
(ignition key cylinder light).
(c) Connect the unlock warning switch connector.
Text in Illustration
*1
Unlock Warning Switch Connector
2. INSTALL UPPER STEERING COLUMN COVER
(a) for Manual Tilt:
(b) for Manual Tilt and Manual Telescopic Steering Column:
(c) for Power Tilt and Power Telescopic Steering Column:
3. INSTALL LOWER STEERING COLUMN COVER
(a) for Manual Tilt:
(b) for Manual Tilt and Manual Telescopic Steering Column:
(c) for Power Tilt and Power Telescopic Steering Column:
LIGHTING: IGNITION KEY CYLINDER LIGHT: INSTALLATION; 20...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002ZZF00RX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: LIGHTING: PERSONAL LIGHT ASSEMBLY: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
LIGHTING: PERSONAL LIGHT ASSEMBLY: COMPONENTS; 2015 ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZZI00RX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: LIGHTING: PERSONAL LIGHT ASSEMBLY: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
1. REMOVE ROOF CONSOLE BOX ASSEMBLY (PERSONAL LIGHT ASSEMBLY)
*1
Protective Tape
Tape the screwdriver tip before use.
Text in Illustration
*2
Tape
(c) Using a T20 "TORX" socket wrench, remove the 4 screws.
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZZG00RX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: LIGHTING: PERSONAL LIGHT ASSEMBLY: DISASSEMBLY; 2015 MY Tundra [08/2014 - ]
DISASSEMBLY
1. REMOVE MAP LIGHT BULB
HINT:
Use the same procedure for both map light bulbs.
(a) Put protective tape around the map light lens.
Text in Illustration
*1
Protective Tape
(b) Using a screwdriver, detach the 2 claws and guide and remove the map light lens.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*2
Tape
(c) Using a screwdriver, push out the map light bulb from the back of
Tape the screwdriver tip before use.
Text in Illustration
*1
Tape
LIGHTING: PERSONAL LIGHT ASSEMBLY: DISASSEMBLY; 2015 ...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст