Toyota Tundra (2015 year). Manual — part 388
59. INSTALL B-3 ACCUMULATOR PISTON
(a) Coat 2 new O-rings with ATF, and install them to the piston.
(b) Install the spring and accumulator piston to the hole.
Spring Diameter:
SPRING
FREE LENGTH
OUTER DIAMETER
COLOR
B-3
70.5 mm (2.78 in.)
19.7 mm (0.776 in.)
Purple
60. INSTALL C-2 ACCUMULATOR PISTON
(a) Coat 2 new O-rings with ATF, and install them to the piston.
(b) Install the spring and accumulator piston to the hole.
Spring Diameter:
SPRING
FREE LENGTH
OUTER DIAMETER
COLOR
C-2
62.0 mm (2.44 in.)
15.9 mm (0.626 in.)
White
61. INSTALL CHECK BALL BODY
(a) Install the spring and check ball body.
62. INSTALL BRAKE DRUM GASKET
(a) Install 3 new brake drum gaskets.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
63. INSTALL TRANSMISSION CASE GASKET
(a) Install 3 new transmission case gaskets.
64. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
Torque:
11 N·m {112 kgf·cm, 8ft·lbf}
HINT:
Each bolt length is indicated below.
36 mm (1.42 in.) for bolt A
25 mm (0.984 in.) for bolt B
45 mm (1.77 in.) for bolt C
50 mm (1.97 in.) for bolt D
(c) Install the detent spring and detent spring cover with the bolt.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
65. INSTALL TRANSMISSION WIRE
(a) Coat a new O-ring with ATF, and install it to the transmission wire connector.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(b) Install the transmission wire.
(c) Install the bolt.
Torque:
5.4 N·m {55 kgf·cm, 48in·lbf}
(d) Connect the 9 solenoid connectors.
(e) Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.
Torque:
for bolt A -
10 N·m {102 kgf·cm, 7ft·lbf}
for bolt B -
11 N·m {112 kgf·cm, 8ft·lbf}
HINT:
Each bolt length is indicated below.
12 mm (0.472 in.) for bolt A
36 mm (1.42 in.) for bolt B
(f) Attach the wire harness to the 2 clamps.
66. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
(a) Coat a new O-ring with ATF, and install it to the oil strainer.
(b) Install the oil strainer with the 4 bolts.
Torque:
10 N·m {102 kgf·cm, 7ft·lbf}
67. INSTALL TRANSMISSION OIL CLEANER MAGNET
(a) Install the 4 magnets.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
68. INSTALL AUTOMATIC TRANSMISSION OIL PAN
SUB-ASSEMBLY
(a) Install a new gasket to the oil pan.
(b) Install the oil pan with the 20 bolts.
Torque:
7.0 N·m {71 kgf·cm, 62in·lbf}
(c) Install a new gasket and the drain plug.
Torque:
20 N·m {204 kgf·cm, 15ft·lbf}
(d) Install a new gasket and the overflow plug.
Torque:
20 N·m {204 kgf·cm, 15ft·lbf}
69. INSTALL EXTENSION HOUSING REAR OIL SEAL
SST: 09316-60011
09316-00011
09316-00051
Standard depth:
5.4 to 5.8 mm (0.213 to 0.228 in.)
70. INSTALL EXTENSION HOUSING DUST DEFLECTOR
(a) Using SST and a hammer, tap on a new dust deflector.
SST: 09223-15020
SST: 09950-70010
09951-07100
71. INSTALL EXTENSION HOUSING SUB-ASSEMBLY
Seal packing:
Toyota Genuine Seal Packing 1281,
Three Bond 1281 or equivalent
Seal diameter:
1.0 to 1.5 mm (0.0394 to 0.0591 in.)
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст