Toyota Tundra (2015 year). Manual — part 387
(a) Install the 2 thrust needle roller bearings.
HINT:
ITEM
INSIDE
OUTSIDE
Bearing A
71.96 to 72.26 mm (2.83 to 2.84 in.)
85.25 to 85.6 mm (3.36 to 3.37 in.)
Bearing B
34.65 to 34.85 mm (81.36 to 1.37 in.)
51.56 to 51.86 mm (2.03 to 2.04 in.)
(b) Coat the clutch drum thrust washer with petroleum jelly and install it to the clutch drum and input shaft
assembly.
(c) Install the clutch drum and input shaft assembly to the
transmission case.
50. INSTALL OIL PUMP ASSEMBLY
(a) Coat a new O-ring with ATF, and install it to the oil pump.
(b) Install the 2 thrust bearing races to the front oil pump.
Thrust Bearing Race Diameter:
ITEM
INSIDE
OUTSIDE
Race A
74.26 to 74.56 mm (2.92 to 2.94 in.)
87.39 to 87.74 mm (3.44 to 3.45 in.)
Race B
37.0 to 37.3 mm (1.46 to 1.47 in.)
52.1 to 52.3 mm (2.05 to 2.06 in.)
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
transmission case.
(d) Hold the input shaft, and lightly press the oil pump body to slide the oil seal rings into the overdrive direct
clutch drum.
Toyota Genuine Seal Packing 1281,
Three Bond 1281 or equivalent
(f) Install the oil pump with the 10 bolts.
Torque:
21 N·m {215 kgf·cm, 16ft·lbf}
NOTICE:
52. INSTALL MANUAL VALVE LEVER SHAFT OIL SEAL
(a) Using SST, tap in 2 new oil seals.
SST: 09350-30020
09350-07110
Standard depth:
-0.3 to 0.3 mm (-0.0118 to 0.0118 in.)
(a) Install a new spacer to the manual valve lever.
(b) Push the manual valve lever shaft through the transmission case, and install the manual valve lever to the
shaft.
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(c) Using a hammer, tap in a new spring pin.
(d) Align the manual valve lever indentation with the spacer hole,
and stake them together with the punch.
(e) Check that the shaft rotates smoothly.
54. INSTALL PARKING LOCK PAWL SHAFT
(a) Install a new E-ring to the shaft.
(b) Install the parking lock pawl, shaft and spring.
55. INSTALL PARKING LOCK ROD SUB-ASSEMBLY
(a) Connect the parking lock rod to the manual valve lever.
56. INSTALL PARKING LOCK PAWL BRACKET
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
(a) Install the parking lock pawl bracket to the transmission case with the 3 bolts.
Torque:
7.4 N·m {75 kgf·cm, 65in·lbf}
(b) Move the manual valve lever to the P position, and confirm that
the planetary ring gear is correctly locked by the lock pawl.
57. INSTALL B-1 ACCUMULATOR VALVE
(a) Install the 2 springs and accumulator valve to the hole.
Spring Diameter:
SPRING
FREE LENGTH
OUTER DIAMETER
COLOR
B-1 Inner
44.98 mm (1.77 in.)
11.3 mm (0.445 in.)
Natural
B-1 Outer
46.36 mm (1.83 in.)
17.1 mm (0.673 in.)
Natural
58. INSTALL C-3 ACCUMULATOR PISTON
(a) Coat 2 new O-rings with ATF, and install them to the piston.
(b) Install the 2 springs and accumulator piston to the hole.
Spring Diameter:
SPRING
FREE LENGTH
OUTER DIAMETER
COLOR
C-3 Inner
44.0 mm (1.73 in.)
14.0 mm (0.551 in.)
Yellow
C-3 Outer
73.35 mm (2.89 in.)
19.9 mm (0.783 in.)
Red
A760E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMIS...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст