Toyota Tundra (2015 year). Manual — part 2881
3. INSTALL HOOD LOCK ASSEMBLY
*a
Back Side
*b
Front Side
(b) Connect the hood lock control cable assembly.
(c) Install the hood lock assembly.
(d) Install the 2 bolts and hood lock bolt.
Torque:
8.0 N·m {82 kgf·cm, 71in·lbf}
(e) Install a new hood lock nut cap.
(f) w/ Engine Hood Courtesy Switch:
(1) Connect the connector.
(2) Attach the clamp.
4. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSE...
Last Modified: 9-16-2014
6.6 K
Doc ID: RM000002ZNV012X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: ENGINE HOOD / DOOR: HOOD SUPPORT: COMPONENTS; 2015 MY Tundra [08/2014 - ]
COMPONENTS
ILLUSTRATION
ENGINE HOOD / DOOR: HOOD SUPPORT: COMPONENTS; 2015 ...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZNW01FX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: ENGINE HOOD / DOOR: HOOD SUPPORT: REMOVAL; 2015 MY Tundra [08/2014 - ]
REMOVAL
CAUTION:
Remove the hood support assembly LH while holding the hood.
NOTICE:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. REMOVE HOOD SUPPORT ASSEMBLY LH
(a) Using a screwdriver, remove the 2 stop rings as indicated by the
arrows in the order shown in the illustration.
HINT:
Tape the screwdriver tip before use.
CAUTION:
Remove the hood support assembly LH while holding the hood.
Text in Illustration
*1
Protective Tape
(b) Detach the 2 ball joints and then remove the hood support assembly LH.
2. REMOVE NO. 1 HOOD SUPPORT BOLT
(a) Remove the No. 1 hood support bolt.
ENGINE HOOD / DOOR: HOOD SUPPORT: REMOVAL; 2015 MY T...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002ZNU01FX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: ENGINE HOOD / DOOR: HOOD SUPPORT: INSTALLATION; 2015 MY Tundra [08/2014 - ]
INSTALLATION
CAUTION:
Install the hood support assembly LH while holding the hood.
NOTICE:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. INSTALL NO. 1 HOOD SUPPORT BOLT
(a) Install the No. 1 hood support bolt.
Torque:
22 N·m {224 kgf·cm, 16ft·lbf}
CAUTION:
Install the No. 1 hood support bolt while supporting the hood by
hand.
2. INSTALL HOOD SUPPORT ASSEMBLY LH
(a) Install the 2 stop rings to the hood support assembly LH.
(b) Attach the 2 ball joints to install the hood support assembly LH.
(c) Check that the hood support assembly LH is connected to the
ball joint and cannot be pulled off.
CAUTION:
Install the hood support assembly LH while holding the hood.
NOTICE:
Check that the hood support assembly LH is engaged in the ball
joint and it cannot be pulled out.
ENGINE HOOD / DOOR: HOOD SUPPORT: INSTALLATION; 2015...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст