Toyota Tundra (2015 year). Manual — part 2880
ILLUSTRATION
ILLUSTRATION
ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSE...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002M7S02WX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL; 2015 MY Tundra [08/2014
- ]
REMOVAL
1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY
2. REMOVE HOOD LOCK ASSEMBLY
(a) w/ Engine Hood Courtesy Switch:
(1) Disconnect the connector.
(2) Detach the clamp.
(b) Using a screwdriver, remove the hood lock nut cap.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape
(c) Remove the 2 bolts and hood lock bolt.
(d) Remove the hood lock assembly.
(e) Disconnect the hood lock control cable assembly.
3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSE...
(a) Detach the 3 claws.
(b) Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.
4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, detach the hood lock control cable assembly from the clamps as shown in the
illustration.
HINT:
Tape the screwdriver tip before use.
(b) Pull the hood lock control cable assembly from the engine room and remove it.
Text in Illustration
*1
Hood Lock Control Cable Assembly
*2
Clamp
*3
Grommet
-
-
ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSE...
Last Modified: 9-16-2014
6.6 A
Doc ID: RM000002M7Q02VX
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
Title: ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION; 2015 MY Tundra
[08/2014 - ]
INSTALLATION
HINT:
A bolt without a torque specification is shown in the standard bolt chart
.
1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Pass the hood lock control cable assembly into the engine room.
Text in Illustration
*1
Hood Lock Control Cable Assembly
*2
Clamp
*3
Grommet
-
-
2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.
(b) Attach the 3 claws to install the hood lock lever sub-assembly.
ENGINE HOOD / DOOR: HOOD LOCK CONTROL CABLE ASSE...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст