Toyota Tundra (2015 year). Manual — part 2377
(a) Apply protective tape as shown in the illustration.
Text in Illustration
*1
Protective Tape
(b) Detach the 3 clips, claw and remove the instrument cluster finish panel ornament.
18. REMOVE INSTRUMENT CLUSTER FINISH PANEL
ASSEMBLY
(a) Remove the 2 clips.
(b) Detach the 6 clips and remove the instrument cluster finish panel
assembly.
19. REMOVE COMBINATION METER ASSEMBLY
20. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(a) Detach the clip, 4 claws and 2 guides and remove the No. 2
instrument panel under cover sub-assembly.
21. REMOVE LOWER INSTRUMENT PANEL
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
(a) Remove the screw <D> and bolt <A>.
(b) Detach the 3 claws and remove the lower instrument panel.
22. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
23. REMOVE NO. 4 INSTRUMENT REGISTER SUB-ASSEMBLY
(a) Apply protective tape as shown in the illustration.
Text in Illustration
*1
Protective Tape
(b) Using a moulding remover B, detach the 10 clips and remove the No. 4 instrument register sub-assembly.
24. REMOVE INSTRUMENT SIDE PANEL RH
(a) Using a moulding remover B, detach the 3 claws, 4 guides and
remove the instrument side panel RH.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
25. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
(a) Apply protective tape as shown in the illustration.
Text in Illustration
*1
Protective Tape
(b) Remove the bolt <A> and 4 screws <F>.
(c) Detach the 4 claws and remove the lower instrument panel finish panel sub-assembly RH.
26. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
(a) Apply protective tape as shown in the illustration.
Text in Illustration
*1
Protective Tape
(b) Using a moulding remover B, detach the 4 clips, 3 claws and remove the No. 2 instrument cluster finish
panel garnish.
27. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL WITH AIR
CONDITIONING CONTROL ASSEMBLY
(a) Apply protective tape as shown in the illustration.
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
Text in Illustration
*A for Automatic Air Conditioning System
*B for Manual Air Conditioning System
*1 Protective Tape
*2 Air Conditioning Control Assembly
*3 Lower Center Instrument Panel Finish Panel
-
-
(b) Using moulding remover B, detach the 8 clips, 2 claws and guide and remove the lower center instrument
panel finish panel together with the air conditioning control assembly.
(c) Disconnect each connector.
28. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
29. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
(a) Apply protective tape as shown in the illustration.
Text in Illustration
*1
Protective Tape
(b) Detach the wire harness clamp and 18 clips and remove the center instrument cluster finish panel
sub-assembly.
(c) for 4WD:
INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Col...
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст